LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2021 >> F-150 Raptor >> Repair and Diagnosis >> Quick Lookups >> Technical Bulletins >> Campaigns >> Other Variant >> Brakes Control Systems >> New Vehicle Demonstration/Delivery Hold - Safety Recall 25S15 - Reprogram Integrated Trailer Relay Module (25S15)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

New Vehicle Demonstration/Delivery Hold - Safety Recall 25S15 - Reprogram Integrated Trailer Relay Module (25S15)

WARNING: This page is about the F-150 Lariat, 4D Pickup Crew Cab, 2.7L Eng VIN P, 4WD, which is a different variant/trim than selected.
Publication date: 2025-04-02
Reference number: 25S15
Supersedes refnos: 22S17

NEW VEHICLE DEMONSTRATION/DELIVERY HOLD - SAFETY RECALL 25S15 - REPROGRAM INTEGRATED TRAILER RELAY MODULE

NEW VEHICLE DEMONSTRATION/DELIVERY HOLD - SAFETY RECALL 25S15 - REPROGRAM INTEGRATED TRAILER RELAY MODULE

SERVICE CAMPAIGN BULLETIN

Reference Number(s): 25S15, Date of Issue:  April 02, 2025
FORD: 2021-2022 F-150; 2022 Expedition, Navigator, Maverick, and Super Duty

NEW VEHICLE DEMONSTRATION/DELIVERY HOLD - SAFETY RECALL 25S15

SUBJECT

NEW VEHICLE DEMONSTRATION/DELIVERY HOLD - Safety Recall 25S15 

Certain 2021-2022 Model Year F-150, 2022 Model Year-Expedition, Navigator, Maverick, and Super Duty Vehicles

Reprogram Integrated Trailer Relay Module

REF

NEW VEHICLE DEMONSTRATION/DELIVERY HOLD 

Safety Recall 22S17 Supplement #2 

Dated: August 24, 2022

AFFECTED VEHICLES

AFFECTED VEHICLES

Vehicle Model Year Assembly Plant Build Date Range
Expedition 2022 Kentucky December 7, 2021 through February 10, 2022
F-150 2021 Dearborn October 5, 2020 through November 21, 2021
F-150 2022 Dearborn November 2, 2021 through February 10, 2022
F-150 2021 Kansas City October 27, 2020 through December 12, 2021
F-150 2022 Kansas City December 13, 2020 through February 15, 2022
Maverick 2022 Hermosillo March 9, 2021 through February 17, 2022
Navigator 2022 Kentucky October 5, 2021 through February 9, 2022
Super Duty 2022 Kentucky May 28, 2021 through February 14, 2022

U.S. population of affected vehicles: 10,531. Affected vehicles are identified in OASIS and FSA VIN Lists.

REASON FOR THIS SAFETY RECALL

According to Ford's records, Certain 2021-2022 Model Year F-150, 2022 Model Year-Expedition, Navigator, Maverick, and Super Duty Vehicles may not have the remedy for Safety Recall 22S17 installed correctly but were recorded as having received the repair successfully. Because the correct software update may not have been installed on these vehicles, the underlying condition specified in Safety Recall 22S17 may still exist. In all of the affected vehicles, the trailer brake controller may not properly apply the trailer brakes when towing a trailer equipped with an electric or electric-over-hydraulic brake system. This may result in no trailer brake function while driving, loss of trailer brakes, and extended stopping distances, increasing the risk of a crash.

SERVICE ACTION

Before demonstrating or delivering any new in-stock vehicles involved in this recall, dealers are to reprogram the trailer relay module (TRM).

For 2021 MY F-150 Only - If DTC U0140:82 is present after the TRM software update. Program GWM, TCU, APIM, IPMA (and the 12" IPC - if equipped) until there are no remaining updates for those modules, with the latest level software. This service must be performed on all affected vehicles at no charge to the vehicle owner.

To assist vehicle owners to have this repair completed, dealers should:

  • Arrange for a mobile repair at the owner's location,
  • Arrange to pick up the owner's vehicle and drive it to the dealership for repairs
    • Re-deliver the owner's vehicle after repairs have been completed.
  • Pick-Up & Delivery, and mobile service should be made available for all customers. Refer to the Rental and Claiming sections for further details.

OWNER NOTIFICATION MAILING SCHEDULE

Owners' letters are expected to be mailed the week of April 14, 2025, or sooner. Owners will be given the option of installing the software update themselves, or they can have their dealer perform the service for them.

PLEASE NOTE: 

Federal law requires dealers to complete this recall service before a new vehicle is delivered to the buyer or lessee. Violation of this requirement by a dealer could result in a civil penalty of up to $27,168 per vehicle. Correct all vehicles in your new vehicle inventory before delivery. 

ATTACHMENTS

  • Administrative Information
  • Labor Allowances and Parts Ordering Information
  • Technical Instructions
  • Mobile Service Repair Assessment
  • Vehicle Pick-Up & Delivery Record
  • Owner Notification Letters
  • Recall Reimbursement Plan

QUESTIONS & ASSISTANCE

For questions and assistance, contact the Special Service Support Center (SSSC) via the SSSC Web Contact Site. The SSSC Web Contact Site can be accessed through the Professional Technician System (PTS) website using the SSSC link listed at the bottom of the OASIS VIN report screen or listed under the SSSC tab.

Customer Service Division

ADMINISTRATIVE INFORMATION

Safety Recall 25S15 

MOBILE SERVICE REPAIR ASSESSMENT LEVEL

  • All repairs in this program have the following assessment level.
    • Mobile Reprogramming

MOBILE REPAIR RECOMMENDATIONS

  • Confirm with the customer a mobile repair is feasible.
  • Check OASIS before going to the customer's home or business to confirm if any other outstanding FSA needs to be completed.
  • Transportation - due to the simplicity of this repair, a specialty vehicle is not required.

MOBILE REPAIR ADDITIONAL INFORMATION

Please ensure the technician brings the following to the mobile repair destination:

  • Printed Technical Instructions
  • Printed Repair/Work Order or any other necessary documentation as customer copy(s)
    • Documents could also be emailed to the customer.
  • Shirt/uniform and vehicle graphic with the dealership or Ford logos are recommended.

MOBILE REPAIR QUESTIONS AND ASSISTANCE

  • For questions and assistance, contact the Special Service Support Center (SSSC) via the SSSC Web Contact Site. Work with Dealership warranty administrator to create a SSSC contact ID#.
  • Once an SSSC agent responds to the new contact ID#, you may opt to call the SSSC hotline: (800) 325-5621.

OASIS ACTIVATION

OASIS will be activated on April 2, 2025.

FSA VIN LISTS ACTIVATION

FSA VIN Lists will be available through https://web.fsavinlists.dealerconnection.com  on April 2, 2025. Owner names and addresses will be available by May 2, 2025.

NOTE: Your FSA VIN Lists may contain owner names and addresses obtained from motor vehicle registration records. The use of such motor vehicle registration data for any purpose other than in connection with this recall is a violation of law in several states, provinces, and countries. Accordingly, you must limit the use of this listing to the follow-up necessary to complete this recall.

SOLD VEHICLES

  • Ford has not issued instructions to stop selling/delivering or driving used vehicles under this safety recall. Owners should contact their dealers for an appointment to have their vehicles remedied as soon as practicable.
  • Immediately contact any of your affected customers whose vehicles are not on your VIN list but are identified in OASIS. Give the customer a copy of the Owner Notification Letter (when available) and schedule a service date.
  • Correct other affected vehicles identified in OASIS which are brought to your dealership.
  • Dealers are to prioritize repairs of customer vehicles over repairs of new and used vehicle inventory.

STOCK VEHICLES

  • Correct all affected units in your new vehicle inventory before delivery.
  • Use OASIS to identify any affected vehicles in your used vehicle inventory.

DEALER-OPERATED RENTAL VEHICLES

The Fixing America's Surface Transportation (FAST) Act law effective June 2016 prohibits a rental company from selling, renting, or leasing vehicles subject to a safety or compliance recall. Please consult your legal counsel for legal advice.

BRANDED/SALVAGED TITLE VEHICLES

Affected branded/salvaged title vehicles are eligible for this recall.

OWNER REFUNDS

  • This Safety Recall must still be performed, even if the owner has paid for a previous repair. Claiming a refund will not close the recall on the vehicle. 
  • Ford Motor Company is offering a refund for owner-paid repairs covered by this recall if the repair was performed before the date indicated in the reimbursement plan, which is posted with this bulletin. Owners are directed to seek reimbursement through authorized dealers or, at their option, directly through Ford Motor Company at PO Box 6251, Dearborn, Ml 48121-6251.
  • Dealers are also pre-approved to refund owner-paid emergency repairs that were performed away from an authorized servicing dealer after the end date specified in the reimbursement plan. Non-covered repairs, or those judged by Ford to be excessive, will not be reimbursed.
  • Refunds will only be provided for the cost associated with Reprogram Integrated Trailer Relay Module.

RENTAL VEHICLES

Rental vehicles are not approved for this program.

MOBILE SERVICE CLAIMING QUESTIONS

  • Dealers participating in the Remote Experience Program:
    • Ford and Lincoln Dealers - refer to EFC16075, Announcing the 2025 Remote Experience Program.
  • Dealers NOT participating in the 2025 Remote Experience Program:
    • For questions and assistance, contact the Special Service Support Center (SSSC) via the SSSC Web Contact Site.
    • Work with the Dealership warranty administrator to create an SSSC contact ID#.
    • Once an SSSC agent responds to the new contact ID#, you may opt to call the SSSC hotline: (800) 325-5621.

FORD PICK-UP & DELIVERY

  • Dealers participating in the Remote Experience Program:
    • Refer to EFC16075, Announcing the 2025 Remote Experience Program for additional details.
  • Dealers NOT participating in the 2025 Remote Experience Program:
    • Dealers may claim one-half labor hour per repair for vehicle Pick-Up & Delivery services.
    • Dealers must retain a Vehicle Pick-Up & Delivery Record with the repair order documentation.

LINCOLN PICK-UP & DELIVERY

  • Owners of Lincoln vehicles within a 4 year/50,000-mile warranty have the option of requesting Pick-Up & Delivery service, from their dealership. For details, reference EFC15921, 2025 Lincoln Pick-Up & Delivery Program Announcement.
  • For Lincoln vehicles outside of 4 years/50,000-mile warranty, refer to refer to EFC16075, Announcing the 2025 Remote Experience Program.
  • Dealers NOT participating in the 2025 Remote Experience Program:
    • For Lincoln vehicles outside of 4 years/50,000-mile warranty, see labor claiming table below.

ADDITIONAL REPAIR (LABOR TIME AND/OR PARTS)

Additional repairs identified as necessary to complete the FSA should be managed as follows:

  • For related damage and access time requirements, refer to the Warranty and Policy Manual/Section 6 - Ford & Lincoln Program Policies/General Information & Special Circumstances for FSAs/Related Damage.
  • For module replacement: 
    • If module replacement is required, confirm if a Repair Validation Code (RVC) is required. Reference PTS/Technical Assistance/Components Requiring a Repair Validation Code.
    • Claiming the MT25S15RR labor operation code does not  require an RVC code if no module replacement is required, however, clock times should be consistent with vehicle history on PTS.
  • For vehicles within new vehicle bumper-to-bumper warranty coverage, no SSSC approval is required  , although related damage must be on a separate repair line with the "Related Damage" radio button checked.
    • Ford vehicles - 3 years or 36,000 miles
    • Lincoln vehicles - 4 years or 50,000 miles
  • For vehicles outside new vehicle bumper-to-bumper warranty coverage (Pick 1):
    • Submit an Approval Request to the SSSC Web Contact Site before completing the repair.

CLAIMS PREPARATION AND SUBMISSION

  • Technician Competency Requirement:  The STST Competency 10 certification requirement in the U.S. market only will be enforced starting with repair orders opened on or after August 31, 2024. FSA repairs will reject and the claim will not be paid if the repairing technician is not certified in STST Competency 10 FSA. See EFC15936 for more details.
  • Software Verification Approval Code Requirement:  Beginning with Repair Orders (ROs) opened on or after January 15th, 2025, new FSA software repairs and the first phase of already launched FSAs will require Software Verification and an approval code provided by Ford. The approval code will be required when performing software repairs using the FDRS and IDS. See EFC16247 for more details.
  • Claim Entry:  Enter claims using Dealer Management System (DMS) or One Warranty Solution (OWS) online.
    • When entering claims, select claim type 31: Field Service Action. The FSA number (25S15) is the subcode.
    • For additional claims preparation and submission information, refer to the Recall and Customer Satisfaction Program (CSP) Repairs in the OWS User Guide.
  • Related Damage/Additional labor and/or parts:  Must be claimed as Related Damage on a separate repair line from the FSA with the same claim type and subcode as described in Claim Entry above.
    IMPORTANT: Click the Related Damage Indicator radio button.
  • Refunds:  Submit refunds on a separate repair line.
    • Program Code: 25S15
    • Misc. Expense: REFUND
    • Misc. Expense: ADMIN
    • Misc. Expense: 0.2 Hrs.
    • Multiple refunds should be submitted on one repair line and the invoice details for each repair should be detailed in the comments section of the claim.
  • Lincoln Pick-Up & Delivery:  Claims for Lincoln Pick-Up & Delivery should be submitted on a separate line from the FSA. Refer to EFC15921, 2025 Lincoln Pick-Up & Delivery Program Announcement for details.
    • For Lincoln vehicles outside of 4 years/50,000-mile warranty, refer to refer to EFC16075, Announcing the 2025 Remote Experience Program
    • Dealers NOT participating in the 2025 Remote Experience Program
      • For Lincoln vehicles outside of 4 years/50,000-mile warranty, see labor claiming table below.
  • Ford Pick-Up & Delivery: 
    • Dealers participating in the Remote Experience Program -
      • Refer to EFC16075, Announcing the 2025 Remote Experience Program for additional details.
    • Dealers NOT participating in the 2025 Remote Experience Program -
      • Dealers may claim one-half labor hour per repair for vehicle Pick-Up & Delivery services.
      • Dealers must retain a Vehicle Pick-Up & Delivery Record with the repair order documentation.
  • Mobile Repair: 
    • Dealers participating in the 2025 Remote Experience Program:
      • Ford and Lincoln - Refer to EFC16075, Announcing the 2025 Remote Experience Program for additional details.
    • Dealers NOT participating in the 2025 Remote Experience Program:
      • Mobile repair allowances can be claimed for dealer-performed mobile repairs. Dealers that are working with Ford-contracted mobile repair companies should refer to those companies for claiming instructions.
      • For dealer-performed mobile repairs, retain a copy of the Service Management signed record (see Repair Procedure Improvement & Revised Labor Time), with the repair order documentation.
      • Claim the mobile repair allowance Labor Operation Code 25S15MM along with the applicable Labor Operation Code for the repair (refer to the Labor Allowances table in Labor Allowances and Parts Ordering Information).

LABOR ALLOWANCES AND PARTS ORDERING INFORMATION

Safety Recall 25S15 

LABOR ALLOWANCES

LABOR ALLOWANCES

Description Labor Operation Labor Time
Repair: Reprogram Integrated Trailer Relay Module with the latest level using FDRS. 25S15B 0.4 Hour
F-150 Only  - If DTC U0140:82 is present after the TRM software update, (and the 12" IPC - if equipped) Program GWM, TCU, APIM, IPMA until there are no remaining updates for those modules. MT25S15C Up to 8.0 Hours
TRM software failed and/or TRM module replacement required.
SSSC approval is not required unless M-Time is exceeded.
Clock times should be consistent with vehicle history on PTS. 
MT25S15RR Up to 4.0 Hours
Mobile Service: This allowance is only for non-eligible 2025 Remote Experience Program Dealers. 
Can be used when the repair takes place away from the dealership.
If Additional Time is Required Due to Travel, Please Submit an SSSC Approval Form.
This allowance is only for non-eligible 2025 Remote Experience Program Dealers. 
Can be used when the repair takes place away from the dealership. If Additional Time is Required Due to Travel, Please Submit an SSSC Approval Form.
25S15MM 0.5 Hours
Lincoln  Vehicle Pick-Up & Delivery Allowance: Only  vehicles outside  of Lincoln Pick-UD & Delivery contract coverage of 4 years/50,000 miles for dealers NOT participating in the 2025 Remote Experience Program. 
NOTE: This allowance is for dealer-performed vehicle Pick-Up & Delivery for dealership repairs only. Can only be claimed once, regardless of outstanding FSAs repaired.
25S15LL 0.5 Hours
Ford  Vehicle Pick-Up & Delivery Allowance:
This allowance is only for non-eligible 2025 Remote Experience Program Dealers. 
NOTE: This allowance is for dealer-performed vehicle Pick-Up & Delivery for dealership repairs only. Can only be claimed once, regardless of outstanding FSAs repaired.
25S15PP 0.5 Hours

PARTS REQUIREMENTS/ORDERING INFORMATION

Parts are not required to complete this repair.

25S15 

MOBILE REPAIR/VEHICLE PICK-UP AND DELIVERY RECORD

G17007427

MOBILE SERVICE REPAIR ASSESSMENT

NEW VEHICLE DEMONSTRATION/DELIVERY HOLD-Safety Recall 25S15 

Certain 2021-2022 Model Year F-150, 2022 Model Year, Expedition, Navigator, Maverick, and Super Duty Vehicles Reprogram Integrated Trailer Relay Module

Mobile Service Repair Assessment 

Assessment levels have been identified to help determine the ease of performing eligible mobile service repairs for a Field Service Action (FSA) outside of the dealership service facility.

DEALER BULLETIN

Within the Administrative Information Attachment of the dealer bulletin a mobile service repair assessment level(s) will be provided. These assessment levels have been determined using the amount of time, equipment and labor identified to perform the intended service action.

ASSESSMENT LEVELS

  • Mobile Reprogramming (MRA1)
    • Light Mobile Service (MRA2)
      • Enhanced Mobile Service (MRA3)
        • Advanced Mobile Service (MRA4)
  • Not a Mobile Service Repair (MRA5)
  • Wheel and Tire Mobile Service (MRA6)
  • Advanced Driver Assistance System (ADAS) Mobile Repair (MRA7)

Description of each level that is used to determine the overall assessment. 

  • Mobile Reprogramming (MRA1)
    • Module Programming or similar type services
    • Minimum tools maybe required other than an IDS/FDRS  setup
    • FDRS programming that requires internet connection (wi-fi or mobile hotspot)
    • Make sure vehicle has a charge port to ensure battery voltage is maintained during flashing of the module(s)
    • Repairs not greater than 1 hour in length (including time to wait for programming)
    NOTE: The location will need a charging station or wall box to maintain the 12-volt battery.
  • Light Mobile Service (MRA2)
    • Interior repair procedures that do not require seat, dash, or headliner removal
    • Under hood repairs that do not require large component removal
    • Exterior repairs that do not require large component/panel removal
    • Repairs may require standard hand tools (Access to a Technician starter kit or similar)
  • Enhanced Mobile Service (MRA3)
    • A two-person process is required anytime a procedure requires work under the vehicle 
    • Brake Inspection and Brake Repair/Replacement
    • Limited Suspension Component replacement (no alignment)
    • Under Vehicle access for limited repairs (no large component removal)
    • Vehicle Check Up - VCU
    • Pre-Delivery Inspection - PDI
    • Used Car Inspection/Presale Inspection
    • May require floor jack, jack stands, and impact tools
    NOTE: Wheel lock may be required.
  • Advanced Mobile Service (MRA4)
    • Fluid Exchange/Oil Change
    • Light Repairs
    • Brake Hydraulic Repairs
  • Not a Mobile Service Repair (MRA5)
    1. Large component removal
    2. BEV Battery Replacement
    3. Requires a vehicle hoist - to complete the repair (more than inspection)
    4. Required vehicle alignment
    5. Requires significant vehicle disassembly
    6. Repairs greater than 2-3 hours
    7. Any repairs that require M-Time
    8. Includes a service procedure where the vehicle owner may be distressed about the state of their vehicle.
  • Wheel and Tire Mobile Service (MRA6)
    • Tire Removal from Wheel
    • Tire Balancing
    • Tire Repair
    NOTE: Specialized Mobile Service unit and equipment including Tire balancer and Tire Changer required.
  • Advanced Driver Assistance System (ADAS) Mobile Repair (MRA7)
    • Requires the uses of a ADAS Mobile Service Kit.
    • May require a post repair test drive.
      • Parking Lot Maneuvers to capture parking lines for camera alignment.
      • Steady speed cruising (45 MPH).
    • The vehicle service location will have to be validated before scheduling an appointment to determine if a mobile repair is appropriate. 

RECALL REIMBURSEMENT PLAN

FORD MOTOR COMPANY RECALL REIMBURSEMENT PLAN FOR 25S15

Ford and Lincoln dealers are in the best position to quickly and efficiently process reimbursement requests. However, federal legislation requires all motor vehicle manufacturers to establish processes through which customers may seek recall reimbursement directly from the manufacturer or the dealers. 

Regarding the specific reimbursement plan for Recall #25S15, owners who have paid for service to remedy the defect or noncompliance must have had that service performed before May 2,2025. After this date, if repairs related to this recall are performed by a non-Ford repair facility in an emergency, customers must submit any refund requests through their dealership. As required by this federal regulation, Ford Motor Company submitted the details of its latest General Recall Reimbursement Plan in a letter to the National Highway Traffic Safety Administration (NHTSA) in May 2021. The following is the text of that letter and the Plan: 

GENERAL RECALL REIMBURSEMENT PLAN

(As submitted to the NHTSA)

Pursuant to the requirements set forth in 49 CFR Part 573 and Part 577 of the Code of Federal Regulations, Ford Motor Company (Ford) is submitting required information pertaining to our general reimbursement plan for the cost of remedies paid for by vehicle owners before they are notified of a related safety recall.

Set forth below is Ford's general plan to reimburse owners and purchasers for costs incurred for remedies in advance of notification of potential safety-related defects or noncompliances pursuant to Part 573.6 (c)(8)(i). This plan has not changed since our May 5, 2021 submission.

REIMBURSEMENT NOTIFICATION

Ford's notice to a vehicle owner in accordance with 49 CFR Part 577 will indicate that Ford is offering a refund if the owner paid to have service to remedy the defect or noncompliance prior to a specified ending date. In accordance with Part 573.13 (c)(2), this ending date will be defined as a minimum of ten calendar days after the date on which Ford mailed the last of its Part 577 notifications to owners and will be indicated in the specific reimbursement plan available to owners for an individual recall. This notice will direct owners to seek eligible reimbursement through authorized dealers or, at their option, directly through Ford at the following address:

Ford Motor Company P.O. Box 6251 Dearborn, Ml 48121-6251

Ford notes that this rule allows for the identification of a beginning date for reimbursement eligibility. Under the rule, an owner who paid to remedy the defect or noncompliance prior to the identified beginning date would not be eligible for reimbursement. Ford generally has not established such a beginning date for reimbursement eligibility and does not presently anticipate changing this general policy. However, in any case where Ford determines a beginning date is appropriate, Ford will indicate that date in the owner notice. As permitted by 577.11 (e), Ford may not include a reimbursement notification when all vehicles are well within the warranty period, subject to approval by the Agency.

Version 05-05-21

COSTS TO BE REIMBURSED

For vehicles, reimbursement will not be less than the lesser of:

  • The amount paid by the owner for the remedy that specifically addressed and was reasonably necessary to correct the defect or noncompliance that is the subject of the recall, or
  • The cost of parts for the remedy (to be no more than the manufacturer's list retail price for authorized part(s), plus associated labor at local labor rates, miscellaneous fees (such as disposal of waste) and taxes.

For replacement equipment, reimbursement will be the amount paid by the owner for the replacement item (limited by the amount of the retail list price of the defective or noncompliant item that was replaced, plus taxes, where the brand or model purchased by the owner was different than the brand or model that was the subject of the recall). If the item of motor vehicle equipment was repaired, the reimbursement provisions identified above for vehicles will apply.

Ford notes that costs incurred by the owner within the period during which Ford's original or extended warranty would have provided for a free repair of the problem will not be eligible for reimbursement, as provided by Part 573.13 (d)(1).

ENTITIES AUTHORIZED TO PROVIDE REIMBURSEMENT

Ford will continue to use authorized dealers to reimburse owners under the specific reimbursement plans for a particular recall and will encourage owners to pursue requests for reimbursement directly through dealers to expedite reimbursement. Ford will also provide a mailing address to which customers can, at their option, send requests for reimbursement directly to Ford, as previously noted. Requests for reimbursement sent directly to Ford may take up to 60 days to process. Whether the owner chooses to pursue reimbursement requests through a dealer or directly through Ford, the owner will be directed to submit the required documentation, upon which reimbursement eligibility will be determined.

REQUIRED DOCUMENTATION

The reimbursement determination will depend upon the information provided by the customer. Consistent with Part 573.13 (d)(4) the following information must be submitted:

  • Claimant name and address
  • Vehicle make, model and model year
  • Vehicle identification number (VIN) and, for replacement equipment, a description of such equipment or, for tires, the model, size and TIN (DOT code)
  • Identification of the recall number (either the Ford recall number or the NHTSA recall number)
  • Identification of the owner of the recalled vehicle at the time that the pre-notification remedy was obtained
  • An original receipt for the pre-notification remedy that includes a breakdown of the amount for parts, labor, other costs and taxes, including costs for the replacement item. Where the receipt covers work other than to address the recall or noncompliance, Ford may require the claimant to separately identify costs that are eligible for reimbursement.
  • If the remedy was obtained during the warranty repair did not correct the problem related to the recall

Failure to submit all the above information may result in denial of the reimbursement request.

ADDITIONAL INFORMATION

The Part 577 required owner notice will provide a toll-free telephone number through which specific information about the reimbursement plan can be requested from Ford. This general reimbursement plan will be incorporated into notifications pursuant to Part 573.6 by reference. Information specific to an individual recall also may be incorporated into the Part 573.6 notification.

TECHNICAL INSTRUCTIONS

SAFETY RECALL 25S15 

CERTAIN 2021-2022 MODEL YEAR F-150, 2022 MODEL YEAR EXPEDITION, NAVIGATOR, MAVERICK, AND SUPER DUTY VEHICLES - REPROGRAM INTEGRATED TRAILER RELAY MODULE 

SERVICE PROCEDURE

IMPORTANT: The Service Technician Specialty Training (STST) Competency 10 certification requirement in the U.S. market only will be enforced starting with repair orders opened on or after August 31, 2024. Field Service Action (FSA) repairs will reject and the claim will not be paid if the repairing technician is not certified in STST Competency 10 FSA. See Electronic Field Communication (EFC)15936 for more details.
MODULE PROGRAMMING
NOTE: Program appropriate vehicle modules before performing diagnostics and clear all Diagnostic Trouble Codes (DTCs) after programming. For DTCs generated after programming, follow normal diagnostic service procedures.
  1. Connect a battery charger to the 12V battery.
    NOTE: Verify that the negative cable of the charger is installed on a chassis or engine ground, and not the 12 volt battery negative terminal to prevent the battery saver mode from activating on the vehicle.
    NOTE: If the diagnostic software does not load or if the vehicle cannot be identified properly, make sure there is a good internet connection and the Vehicle Control Module (VCM) is properly connected to the Data Link Connector (DLC).
  2. Log into Ford Diagnostic and Repair System (FDRS).
    NOTE: Vehicle information is automatically retrieved by the diagnostic software and a Network Test is run. Vehicle identification data appears on the screen when this is complete.
  3. Click 'Read VIN from Vehicle'  or manually enter the VIN.
    NOTE: Available modules are shown on the LH side of the screen, and available procedures are listed on the RH side of the screen. Modules that are communicating are highlighted in green.
  4. Select Toolbox tab.
  5. From the list on the LH side of the screen, select the TRM  .
  6. From the list on the RH side of the screen, select TRM  - Integrated Trailer Relay Module (TRM) Software Update.
  7. Click RUN  . Follow all on-screen instructions carefully.
  8. This FSA requires a Software Verification Approval Code after performing the software update. Please follow the instructions in EFC 16335 to obtain the approval code. The claim will not be paid and the FSA will remain open if a Software Verification Approval Code is not provided. 
  9. Disconnect the battery charger from the 12V battery once the programming has completed.
  10. If Brake Assist message is displayed after TRM reprogramming, vehicle will need to be driven to clear
    NOTE: Vehicle will need to be driven at least 1 mile (2KM) at 40 MPH (64 KPH).
  11. Run the self-test to look for DTCs. Was DTC U0140:82 found in the TRM?

    No - Recall is complete.

    Yes - Continue to Step 12 for 2021 F-150 vehicles only.

    For 2021 F-150 ONLY if DTC U0140:82 is present. 

  12. Check the vehicle's State Of Charge Parameter Identification Data (PID)  by performing the following:
    • Launch the Ford Diagnostic and Repair System (FDRS) and navigate to toolbox tab > datalogger > BCM and select BATT SOC PID. 
    • Ensure that the BATT_SOC PID  reads over 80%. If the PID is less than 80%, fully recharge the vehicle's 12-volt battery using the appropriate Rotunda battery tester and charger.
    • Remove the charger from the vehicle and using FDRS, navigate to toolbox tab > BCM > Reset Battery. 
    • Monitor Sensor Learned Values application. Perform the BMS reset.
    • Connect the Rotunda battery tester and charger and set it to maintain 12.6 to 13.6 volts. Monitor the voltage real time using the indicator at the bottom right corner of FDRS to ensure that it is within this range.
    NOTE: Verify that the negative cable of the charger is installed on a chassis or engine ground, and not the 12 volt battery negative terminal to prevent the battery saver mode from activating on the vehicle.
    NOTE: If the diagnostic software does not load or if the vehicle cannot be identified properly, make sure there is a good internet connection and the Vehicle Communication Module (VCM) is properly connected to the Data Link Connector (DLC).
    NOTE: VCM 3 is recommended for improved data download time.
  13. Log into Ford Diagnostic and Repair System (FDRS). Ensure FDRS is updated to the latest version at 31.6.7 or higher.
    NOTE: A 64GB or larger USB flash drive is required for APIM, TCU, and GWM software updates. USB 3.0 or higher is recommended. Make sure the USB flash drive being used is formatted correctly. To see the available drives, hold down the Windows icon keyboard key and press the E keyboard key. Right click on the USB flash drive and select Properties. If File System under the General tab is not exFAT, the drive must be formatted.
    • To format the USB flash drive:
    1. Right click on the USB flash drive.
    2. Select Format, select exFAT for the File System.
    3. Select Default Allocation Size for the Allocation Unit Size.
    4. De-selecting Quick Format is not necessary and will result in a lengthier operation.
    NOTE: For the fastest file transfer speed, the use of a USB 3.2 flash drive with a compatible Gen 2 USB 3.2 laptop is recommended.
    NOTE: Once USB flash drive contains the initial files, future file updates using the USB flash drive will require less time.
    NOTE: The USB drive does not have to be formatted between vehicles if you are performing the same program.
  14. Start a new FDRS session.
    NOTE: Vehicle information is automatically retrieved by the diagnostic software and a Network Test is run. Vehicle identification data appears on the screen when this is complete.
  15. Select Toolbox  tab.

    STEPS 16 THROUGH   21  WILL BE USED MULTIPLE TIMES DURING STEPS   22  THROUGH   29 . 

  16. Select Software Updates  tab to see updates available.
  17. Select the module from the Module Programming Sequence section below starting at Step  22.
  18. When prompted by the FDRS, connect the USB flash drive to the personal computer (PC).
  19. When prompted by the FDRS, safely remove/eject the USB flash drive from the PC, turn the vehicle to Key On Engine Running (KOER), and connect the USB to the media hub to install the software update. The update starts automatically and may take 10 minutes or longer to complete.
    NOTE: It may take up to 5 minutes for the vehicle to recognize the USB flash drive with software update.
  20. For APIM, TCU, and GWM USB software updates when SYNC touchscreen prompts to restart the vehicle:
    • Turn the vehicle OFF  .
    • Open the driver door.
    • Wait ten minutes to allow the vehicle to power down.
    • Close the driver's door.
    • Turn the vehicle to KOER  .
  21. Leave the USB drive inserted into the vehicle, until the vehicles infotainment display screen states programming successful. 
    NOTE: It may take up to 5 minutes before SYNC touchscreen displays Update Successful pop up. After 5 minutes if "Successful" pop up is not shown on SYNC touchscreen, remove the USB and select YES  on the FDRS "Was the USB Update Successful" prompt (FDRS verifies if the module software update was successfully installed on the module).
    NOTE: Repeat Steps  16-21 (while performing Steps 22- 29) until no more software updates are available for modules covered in Steps 22- 29.

    MODULE PROGRAMMING SEQUENCE 

    IMPORTANT NOTE:  Modules need to be programmed in exactly  the order as listed below (some are repeated) unless there is no update available. Module updates will vary per vehicle based on Ford Power-UP over-the-air (OTA) updates previously completed. Some modules may already be at the latest level.

  22. Select GWM  - Gateway Module (GWM) - software update.
    • See Steps  1621.
    • Run application.
    • If no more software updates are available, move to the next module in the sequence.
    NOTE: If FSA 22B08 is open for this vehicle, perform that field action before proceeding.
  23. Select TCU  - Telematics Control Unit (TCU) - software update.
    • See Steps  1621.
    • Run application.
    • If error message on SYNC display screen or no activity after 10 minutes.
    • See TSB 22-2150 - Module Recovery.
    • Retry TCU software update with same USB drive.
  24. Select APIM  - Accessory Protocol Interface Module (APIM/SYNC) - software update.
    • See Steps  1621.
    • Run application.
    • Follow General Service Bulletin (GSB) 21-7088 - SYNC Programming, USB flash drive method.
    • If error message on SYNC display screen or no activity after 10 minutes.
    • See TSB 22-2150 - Module Recovery.
    • Retry APIM software update with same USB drive.
    NOTE: Step 25 is a required  step separate from Step  22. Please follow all steps exactly as written.
  25. Select GWM  - Gateway Module (GWM) - software update.
    • See Steps  1621.
    • Run application.
    • If no update is available, move to the next module in the sequence.
  26. Select APIM  - Accessory Protocol Interface Module (APIM) - software update.
    • See Steps  1621.
    • Run application.
    • If no update is available, move to the next module in the sequence.
  27. Select TCU  - Telematics Control Unit (TCU) - software update.
    • See Steps  1621.
    • Run application.
    • If error message on SYNC display screen or no activity after 10 minutes.
    • See TSB 22-2150 - Module Recovery.
    • Retry TCU software update with same USB drive.
  28. Select GWM  - Gateway Module (GWM) - software update.
    • See Steps  1621.
    • Run application.
    • If no update is available, move to the next module in the sequence.
  29. Repeat steps  25,  26, and  27 as many times as required until no more updates are available.
  30. Select APIM  - Accessory Protocol Interface Module (APIM/SYNC) - software update.
    • See Steps  1621.
    • Run application.
    • Follow General Service Bulletin (GSB) 21-7088 - SYNC Programming, USB flash drive method.
  31. Select IPMA  - Image Processing Module A (IPMA) - software update.
    • Run application
    • Coordinated update of four modules.
    • Select OK if conditions are met to continue to next module including; Camera Module Rear (CMR), then Cruise Control Module (CCM) module, and then the Power Steering Control Module (PSCM).
    • Refer to TSB's 22-2121  and 22-2109  .
    • If error message on SYNC display screen or no activity after 10 minutes. See TSB 22-2150-Module Recovery.
    • Retry APIM software update with same USB drive.
  32. Perform the following procedures after updating:
    • FDRS IPMA Alignment
    • Appropriate FDRS camera alignment
    • Vehicles equipped with 360 degree camera, IPMA - 360 Degree View Camera Alignment
    • For all other vehicles, perform the IPMA - Pro Trailer Backup Assist Camera Alignment. This procedure should be performed on all vehicles without 360 degree cameras, even if the vehicle is not equipped with Pro Trailer Backing Assist (PTBA).
IMPORTANT INFORMATION FOR MODULE PROGRAMMING
NOTE: When programming a module, use the following basic checks to ensure programming completes without errors.
  • Make sure the 12V battery is fully charged before carrying out the programming steps and connect FDRS/scan tool to a power source.
NOTE: A good internet connection is necessary to identify the vehicle and to load the diagnostic software.
  • Inspect Vehicle Communication Module II (VCM II)/Vehicle Communication and Measurement Module (VCMM) and cables for any damage. Make sure scan tool connections are not interrupted during programming.
  • A hardwired connection is strongly recommended.
  • Turn off all unnecessary accessories (radio, heated/cooled seats, headlamps, interior lamps, HVAC system, etc.) and close doors.
  • Disconnect/depower any aftermarket accessories (remote start, alarm, power inverter, CB radio, etc.).
  • Follow all scan tool on-screen instructions carefully.
  • Disable FDRS/scan tool sleep mode, screensaver, hibernation modes.
  • Create all sessions key on engine off (KOEO). Starting the vehicle before creating a session will cause errors within the programming inhale process.
RECOVERING A MODULE WHEN PROGRAMMING HAS RESULTED IN A BLANK MODULE
  1. Disconnect the VCMII or VCMM from the data link connector (DLC) and your PC.
  2. After ten seconds, reconnect the VCMII/VCMM to the DLC and the PC. Launch FDRS. The VCMII/VCMM icon should turn green in the bottom right corner of the screen. If it does not, troubleshoot the FDRS to VCM connection.
  3. If you are using the same FDRS as the initial programming attempt, select the appropriate VIN from the Vehicle Identification menu. If you are using a different FDRS, select "Read VIN from Vehicle" and proceed through the Network Test.
  4. In the Toolbox menu, navigate to the failed module and Download/Run Programmable Module Installation (PMI). Follow the on-screen prompts. When asked if the original module is installed, select "No" and continue through the installation application.
  5. Once programming has completed, a screen may list additional steps required to complete the programming process. Make sure all applicable steps are followed in order.