LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2021 >> GT >> Repair and Diagnosis >> Steering >> Power Steering >> Removal And Installation >> Power Steering Pressure Sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Power Steering Pressure Sensor: Removal

  1. Remove the front fender splash shield. Refer to: Fender Splash Shield .
  2. Discharge the power steering system. Refer to: Power Steering System Pressure Discharge  .
    1. Disconnect the power steering pressure sensor electrical connector.
    2. Remove the power steering pressure sensor.

      Torque: 168 lb.in (19 Nm)

GFD344303Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals