LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2021 >> Mustang Mach 1, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> General Procedures >> Powertrain/Drivetrain Mount Neutralizing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Powertrain/Drivetrain Mount Neutralizing

For information on Ford Color Coded Illustrations refer to OEM COLOR CODING .

Adjustment 

NOTE: Refer to the appropriate section and procedure for special instructions on loosening and tightening mount fasteners.
  1. Loosen, but do not remove, the powertrain/drivetrain mount fasteners.
  2. NOTE: Do not twist or strain the powertrain/drivetrain mounts or damage to the mounts may occur.

    Start the vehicle and move it in forward 0.6 m (1.97 ft) - 1.2 m (3.94 ft). Then move the vehicle in reverse the same distance.

  3. Tighten the powertrain/drivetrain mount fasteners.
  4. Test the system for normal operation.
scientia non olet · About LEMON Manuals