Network Message Charts
WARNING: This page is about a different car, the 2021 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
Module Network Input Messages - PACM
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Factory mode | BCM | Controls the pedestrian alert system based on the vehicle build status set in factory mode. |
| Ignition status | BCM | Ignition RUN, START and accessory states required for the PACM operating modes and fault reporting. |
| Power pack status | SOBDMC | Determines the HEV operational state. |
| Reverse gear state | PCM | Determines reverse gear state. |
| Transport mode | BCM | Controls the pedestrian alert system based on the vehicle build status set in transport mode. |
| Vehicle speed | PCM | Engages the sounder between 0-30 km/h (0-8 mph). |
Module Network Input Messages - IPC
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Pedestrian alert fault | PACM | Displays the pedestrian sounder fault warning message. |