Cruise Control Module (CCM): Installation

To install, reverse the removal procedure.
Install and tighten the screws in the following sequence.
1. Install and tighten the CCM bracket screw.
  Torque: 36 lb.in (4.1 Nm)
2. Install and tighten the CCM bracket screw.
  Torque: 36 lb.in (4.1 Nm)
3. Install and tighten the CCM bracket screw.
  Torque: 36 lb.in (4.1 Nm)
4. Install and tighten the CCM bracket screw.
  Torque: 36 lb.in (4.1 Nm)
Courtesy of FORD MOTOR COMPANY
NOTE: This step is only necessary when installing a new component.

Using a diagnostic scan tool, complete the PMI process for the CCM following the on-screen instructions.
Align the CCM. Refer to: Cruise Control Radar Alignment .