Shield (Sunshade) Operation

WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

When the shield open switch is pressed and released (one touch operation), the shield will automatically open and stop at the front of the rear fixed glass (comfort stop position), leaving only the front sliding glass panel exposed. Pressing the shield open switch again for one touch operation (after the initial stop), the shield will open the full open position. When the shield is open to any position between full open and the comfort stop and the shield close switch is pressed for one touch operation, the shield moves forward only to the comfort stop position. With the shield in any position between comfort stop (with roof opening panel glass fully closed) and fully closed and the shield close switch is pressed for one touch operation the shield moves to the fully closed position. The shield will not close beyond the comfort stop position if the roof opening panel glass is not fully closed. The roof opening panel glass will not move from any shield switch command. If the shield is in any position forward of the comfort stop position and the roof opening panel open switch is pressed for either manual or one touch operation, the shield will perform a one-touch open operation to the comfort stop position automatically which will then be followed by the front sliding glass panel operation that was requested. For manual operation, press the shield open or close switch and hold until the desired position and release the switch.