LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2021 >> Mustang Mach-E Select, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Climate Control System - General Information) >> Diagnosis And Testing >> Climate Control System - Vehicles With: Dual Automatic Temperature Control (DATC) >> Pinpoint Test(s) >> Pinpoint Test A : P0532, P0533 >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test A : P0532, P0533: Notes

WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Automatic Climate Control System for schematic and connector information.

Normal operation and Fault Conditions 

The A/C pressure transducer receives a ground from the PCM. A 5-volt reference voltage is supplied to the A/C pressure transducer from the PCM. The A/C pressure transducer then sends a voltage to the PCM to indicate the A/C pressure.

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
P0532 A/C Refrigerant Pressure Sensor "A" Circuit Low This DTC sets if the feedback voltage is less than 0.26 volt for at least 2 seconds and the ambient air temperature is greater than 0 °C (32 °F).
P0533 A/C Refrigerant Pressure Sensor "A" Circuit High This DTC sets if the feedback voltage is greater than 4.95 volts for at least 2 seconds and the ambient air temperature is greater than 0 °C (32 °F).

Possible Sources 

Visual Inspection and Diagnostic Pre-checks