Pinpoint Test Ad : DTC B272A: Notes
WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Climate Controlled Seats for schematic and connector information.
Normal Operation and Fault Conditions
The SCME monitors seat cushion temperature while it supplies voltage and ground to both blower motors. The SCME also supplies a variable voltage signal to control the blower speed. Cabin air enters the blower through a filter integrated to the blower motor housing. Heated or cooled air exits the blower motor and flows through a duct to the foam pad.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B272A | Passenger Cushion Over-Temp Detected | If the passenger seat cushion blower motor temperature exceeds 70 ° C (158 ° F) in cool mode or 85 ° C (185 ° F) in heat mode for more than 4 seconds the SCME shuts down the passenger seat system and sets this DTC. |
Possible Causes
- Wiring, terminals or connectors
- Restricted cushion blower motor filter
- Crushed or restricted cushion foam pad
- Cushion blower motor
- SCME