LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2021 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Seating System - Front) >> Diagnosis And Testing >> Front Seats >> Pinpoint Test(s) >> Pinpoint Test Ai : DTC B272F >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test Ai : DTC B272F: Notes

WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Climate Controlled Seats for schematic and connector information.

Normal Operation and Fault Conditions 

The SCME supplies voltage and ground to the backrest and cushion blower motors. The blower motors are independently controlled by separate speed control circuits from the SCME.

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
B272F Passenger Ignition Run/Blower Circuit Short to Ground If either the blower voltage supply or return circuits are open (to both cushion or backrest blowers) or shorted to voltage, the DTC is set and after 4-6 seconds the SCME disables outputs to the passenger seat. The DTC also sets if the blower voltage supply or return circuit is open to only one blower when SCME supply voltage is less than 12 volts.

Possible Causes