Pinpoint Test G: A Module Does Not Respond To The Diagnostic Scan Tool
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Normal Operation and Fault Conditions
Possible Sources
- Fuse
- Communication network concern
- Wiring, terminals or connectors
- Module
- G1 CHECK FOR THE FUSE, WIRING, TERMINALS, CONNECTIONS AND MODULE
- Ignition ON.
- Using a diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs) for the module in question.
Was an obvious cause found?
Yes No The system is operating correctly at this time. The concern may have been caused by an intermittent fault condition.