LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2022 >> Bronco Base, 2D Utility, 2.3L Eng VIN H, Part Time T/Case Control, Standard Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System (Abs) And Stability Control >> Diagnosis And Testing >> Anti-Lock Brake System (ABS) and Stability Control >> Pinpoint Tests >> Pinpoint Test Y: Abs Module Internal Fault Concern
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test Y: Abs Module Internal Fault Concern

Normal Operation and Fault Conditions 

The ABS module carries out self tests during operation, the module also monitors various inputs and compares the values to what is expected. If the values received are out of range, are not what is expected, or if any of the self tests fail, the ABS module sets a DTC.

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Condition
ABS C101F:49 Generic Valve Failure: Internal Electronic Failure Sets when the ABS module detects an internal fault.
ABS C1A08:1C Pressure Sensor Supply: Circuit Voltage Out Of Range Sets when the ABS module detects an internal fault.
ABS U3000:00 Control Module: No Sub Type Information Sets when the ABS module detects an internal hardware fault.
ABS U3000:04 Control Module: System Internal Failures Sets when the ABS module detects an internal hardware fault.
ABS U3000:44 Control Module: Data Memory Failure Sets when the ABS module detects an internal hardware fault.
ABS U3000:45 Control Module: Program Memory Failure Sets when the ABS module detects an internal hardware fault.
ABS U3000:46 Control Module: Calibration/Parameter Memory Failure Sets when the ABS module detects an internal hardware fault.
ABS U3000:47 Control Module: Watchdog/Safety μC Failure Sets when the ABS module detects an internal hardware fault.
ABS U3000:48 Control Module: Supervision Software Failure This DTC is for informational purposes only and sets in conjunction with other ABS module Diagnostic Trouble Codes (DTCs).
ABS U3000:49 Control Module: Internal Electronic Failure Sets when the ABS module detects an internal hardware fault.
ABS U3000:4B Control Module: Over Temperature Sets when the ABS module detects excessive temperature within the ABS module.
ABS U3000:96 Control Module: Component Internal Failure Sets when the ABS module detects an internal hardware fault.

Possible Sources 

PINPOINT TESTS Y: ABS MODULE INTERNAL FAULT CONCERN