Diagnostic Trouble Code (DTC) Chart
Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
| Module | DTC | Description | Action |
|---|---|---|---|
| PCM | P0600:00 | Serial Communication Link: No Sub Type Information | GO to Pinpoint Test A |
| PCM | P0603:00 | Internal Control Module Keep Alive Memory (KAM) Error: No Sub Type Information | GO to Pinpoint Test C |
| PCM | P0604:00 | Internal Control Module Random Access Memory (RAM) Error: No Sub Type Information | GO to Pinpoint Test B |
| PCM | P0605:00 | Internal Control Module Read Only Memory (ROM) Error: No Sub Type Information | GO to Pinpoint Test B |
| PCM | P0607:00 | Control Module Performance: No Sub Type Information | GO to Pinpoint Test B |
| PCM | P060A:00 | Internal Control Module Monitoring Processor Performance: No Sub Type Information | GO to Pinpoint Test A |
| PCM | P060B:00 | Internal Control Module A/D Processing Performance: No Sub Type Information | GO to Pinpoint Test A |
| PCM | P060C:00 | Internal Control Module Main Processor Performance: No Sub Type Information | GO to Pinpoint Test A |
| PCM | P061A:00 | Internal Control Module Torque Performance: No Sub Type Information | GO to Pinpoint Test A |
| PCM | P0630:00 | VIN Not Programmed or Incompatible - ECM/PCM: No Sub Type Information | GO to Pinpoint Test B |
| PCM | P064F:00 | Unauthorized Software/Calibration Detected: No Sub Type Information | GO to Pinpoint Test B |
| PCM | P0685:00 | ECM/PCM Power Relay Control Circuit/Open: No Sub Type Information | GO to Pinpoint Test D |
| PCM | P068A:00 | ECM/PCM Power Relay De-Energized - Too Early: No Sub Type Information | GO to Pinpoint Test D |
| PCM | P06B8:00 | Internal Control Module Non-Volatile Random Access Memory (NVRAM) Error: No Sub Type Information | GO to Pinpoint Test D |
| PCM | P1001:00 | KOER Not Able to Complete, KOER Aborted: No Sub Type Information | GO to Pinpoint Test E |
| PCM | P160A:00 | Control Module Vehicle Options Reconfiguration Error: No Sub Type Information | GO to Pinpoint Test B |
| PCM | P162D:00 | Internal Control Module Cruise Control Performance: No Sub Type Information | GO to Pinpoint Test A |
| PCM | P1674:00 | Control Module Software Corrupted: No Sub Type Information | GO to Pinpoint Test A |
| PCM | P1934:00 | Vehicle Speed Signal: No Sub Type Information | GO to Pinpoint Test F |
| PCM | P193F:00 | Vehicle Speed Signal Intermittent: No Sub Type Information | GO to Pinpoint Test F |
| PCM | U0104:00 | Lost Communication With Cruise Control Module: No Sub Type Information | GO to Pinpoint Test G |
| PCM | U0121:00 | Lost Communication With Anti-Lock Brake System (ABS) Control Module "A": No Sub Type Information | GO to Pinpoint Test H |
| PCM | U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to Pinpoint Test J |
| PCM | U0151:00 | Lost Communication With Restraints Control Module: No Sub Type Information | GO to Pinpoint Test K |
| PCM | U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to Pinpoint Test L |
| PCM | U0164:00 | Lost Communication With HVAC Control Module: No Sub Type Information | GO to Pinpoint Test M |
| PCM | U0212:00 | Lost Communication With Steering Column Control Module: No Sub Type Information | GO to Pinpoint Test I |
| PCM | U023A:00 | Lost Communication With Image Processing Module A: No Sub Type Information | GO to Pinpoint Test N |
| PCM | U0300:00 | Internal Control Module Software Incompatibility: No Sub Type Information | GO to Pinpoint Test O |
| PCM | U0416:00 | Invalid Data Received From Vehicle Dynamics Control Module: No Sub Type Information | GO to Pinpoint Test P |
| PCM | U0437:00 | Invalid Data Received From Differential Control Module - Rear: No Sub Type Information | GO to Pinpoint Test P |
| PCM | U0594:00 | Invalid Data Received From Hybrid/EV Powertrain Control Module "A": No Sub Type Information | GO to Pinpoint Test P |
| PCM | U1014:00 | Invalid Internal Control Module Monitoring Data Received from Restraints Control Module: No Sub Type Information | GO to Pinpoint Test P |
| PCM | U103B:00 | Invalid Internal Control Module Monitoring Data Received from Differential Control Module - Rear: No Sub Type Information | GO to Pinpoint Test P |
| PCM | U2100:00 | Initial Configuration Not Complete: No Sub Type Information | GO to Pinpoint Test Q |
| PCM | U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | GO to Pinpoint Test R |
| PCM | U2200:00 | Control Module Configuration Memory Corrupt: No Sub Type Information | GO to Pinpoint Test S |