Terrain Management System Drive Modes and Transfer Case Position
WARNING: This page is about a different car, the 2022 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Drive mode selection will prompt a 4x4 system mode change upon entry and exit from Normal mode.
NOTE:
Some 4x4 modes will not be available in certain drive modes.
NOTE:
The Grass/Gravel/Snow, Sand and Mud/Ruts modes are for off-road use only.
Press the TM button on the center console to choose between the following modes:
Drive Modes:
- Normal
- For everyday driving.
- Grass/Gravel/Snow
- For Off-road conditions. Select this mode where loose or slippery material such as packed snow, ice, water, grass, or a thin layer of gravel or sand covers a firm surface. If your vehicle cannot gain traction in deep snow, switching off the traction control system may help.
- Mud/Ruts
- For off-road conditions. Select this mode for muddy, rutted, soft or uneven terrain.
- Sand
- For off-road conditions. For off-road conditions. Select this mode in soft dry sand or deep gravel. If crossing wet sand that may be sufficiently deep enough for the wheels to sink into the surface, select Mud/Ruts mode.
Transfer Case Positioning
| Function | Normal | Grass/Gravel/Snow | Mud/Ruts | Sand |
|---|---|---|---|---|
| 2H (4 X 2) | Available | Not Available | Not Available | Not Available |
| 4H (4X4 HIGH) | Available | Available | Available | Available |
| 4L (4X4 LOW) | Available | Available | Available | Available |
| Rear Differential Lock | Available | Available | Available | Available |