LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2022 >> F-150 Tremor >> Repair and Diagnosis >> External Pages >> Different car >> Section 601 (Electronic Engine Controls - 3.0L Power Stroke Diesel) >> Diagnosis And Testing >> Powertrain Control Module (PCM) Input and Output Controls >> Pinpoint Tests >> Pinpoint Test E: P0607
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test E: P0607

WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Normal Operation and Fault Conditions 

    Refer to the DTC Fault Trigger Conditions.

    DTC Fault Trigger Conditions 

    DTC Description Fault Trigger Condition
    PCM P0607:00 Control Module Performance: No Sub Type Information This DTC sets when the PCM internal central processing unit (CPU) has encountered an error. The PCM monitors itself and carries out internal checks of its own CPU. This DTC sets if any of these checks return an incorrect value.

    Possible Sources 

    • Module programming error
    • Aftermarket performance products
    • Damaged PCM

  2. E1 CHECK FOR PCM (POWERTRAIN CONTROL MODULE) DTC (DIAGNOSTIC TROUBLE CODE) S

    • Using a diagnostic scan tool, perform the PCM self-test.

    • Check for any other PCM related symptoms.

    Is DTC P0607 the only DTC present? 

    Yes  Reprogram or update the calibration. Refer to MODULE PROGRAMMING . Check for other DTCs or drive symptoms for further action. Make sure to check for aftermarket performance products.Repeat the self test. If the concern is still present, refer to PCM GUIDED ROUTINE TESTING
    No  DIAGNOSE all PCMDTCs.
scientia non olet · About LEMON Manuals