Pinpoint Test Y: Powertrain Control Module (Pcm) Read Only Memory (ROM) Failure
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Regeneration may occur during normal operation. During regeneration, diagnostic procedures may display biased values. If a regeneration occurs during diagnostic procedures, allow the process to complete before continuing diagnostics.
Normal Operation and Fault Conditions
Refer to the DTC Fault Trigger Conditions.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Condition |
|---|---|---|
| PCM P0601:00 | Internal Control Module Memory Checksum Error: No Sub Type Information | Sets when the PCM detects the central processor unit internal check returns an incorrect value. |
| PCM P062F:00 | Internal Control Module EEPROM Error: No Sub Type Information | Sets when the PCM detects the ROM is corrupt. |
Possible Sources
- Aftermarket performance product
- PCM relay control circuitry concern
- PCM power relay
- PCM calibration
- PCM (12A650)
Visual Inspection and Pre-checks
- Reprogram or update the calibration. Reprogram the vehicle identification vehicle identification block. Check for other Diagnostic Trouble Codes (DTCs) or drive symptoms for further action. Make sure to check for aftermarket performance products before installing a new PCM. If it is necessary to install a new PCM, refer to Powertrain Control Module (PCM) .
PINPOINT TESTS Y: POWERTRAIN CONTROL MODULE (PCM) READ ONLY MEMORY (ROM) FAILURE (Diesel)