Component Description: DDM

The DDM receives power window commands from the driver door window control switch through a LIN. The DDM supplies voltage and ground to operate the driver door window regulator motor. The DDM also communicates driver door window control switch requests to the PDM through the MS-CAN.

For the power mirror functions, the DDM controls the LH exterior mirror glass position by providing voltage and ground to the LH exterior mirror motors based on inputs from the master window control switch. When the RH exterior mirror is selected, the DDM forwards the movement requests to the PDM through the MS-CAN. For more information:

• Refer to: Handles, Locks, Latches and Entry Systems - System Operation and Component Description .
• Refer to: Glass, Frames and Mechanisms - System Operation and Component Description .
• Refer to: Rear View Mirrors - System Operation and Component Description .

The DDM requires PMI when replaced. Refer to: Module Programming .