Information and Entertainment System Vehicles With: AM/FM/CD/SYNC/Touchscreen Display: GFM
| DTC | Description | Action |
|---|---|---|
| B1D19:49 | Compact Disc Unit: Internal Electronic Failure | DIAGNOSE all other GFM Diagnostic Trouble Codes (DTCs) first. If no other Diagnostic Trouble Codes (DTCs) are present, INSTALL a new GFM (CD player). |
| B1D19:4B | Compact Disc Unit: Over Temperature | ALLOW the vehicle interior to reach ambient temperature. REPEAT the GFM self-test. If the DTC is retrieved again, INSTALL a new GFM (CD player). If the DTC is not retrieved again, the system is operating correctly. The concern was caused by an temporary overheating condition. |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to Pinpoint Test AC |
| U0184:00 | Lost Communication With Radio: No Sub Type Information | GO to Pinpoint Test AH |
| U2013:63 | Switch Pack: Circuit / Component Protection Time-Out | CLEAR the DTC. WAIT at least 10 seconds. REPEAT the self-test. If the DTC is retrieved again, INSTALL a new GFM (CD player). |
| U201A:51 | Control Module Main Calibration Data: Not Programmed | CLEAR the DTC. WAIT at least 10 seconds. REPEAT the self-test. If the DTC is retrieved again, INSTALL a new GFM (CD player). |
| U3000:41 | Control Module: General Checksum Failure | CLEAR the DTC. WAIT at least 10 seconds. REPEAT the self-test. If the DTC is retrieved again, INSTALL a new GFM (CD player). |
| U3000:42 | Control Module: General Memory Failure | CLEAR the DTC. WAIT at least 10 seconds. REPEAT the self-test. If the DTC is retrieved again, INSTALL a new GFM (CD player). |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to Pinpoint Test AN |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to Pinpoint Test AO |