| P025A:00 |
Fuel Pump Module "A" Control Circuit/Open: No Sub Type Information |
GO to Pinpoint Test D |
| P025B:00 |
Fuel Pump Module "A" Control Circuit Range/Performance: No Sub Type Information |
GO to Pinpoint Test D |
| P0602:00 |
Powertrain Control Module Programming Error: No Sub Type Information |
GO to Pinpoint Test QA |
| P0604:00 |
Internal Control Module Random Access Memory (RAM) Error: No Sub Type Information |
GO to Pinpoint Test QA |
| P0605:00 |
Internal Control Module Read Only Memory (ROM) Error: No Sub Type Information |
GO to Pinpoint Test QA |
| P0606:00 |
Control Module Processor: No Sub Type Information |
GO to Pinpoint Test QA |
| P0607:00 |
Control Module Performance: No Sub Type Information |
GO to Pinpoint Test QA |
| P0610:00 |
Control Module Vehicle Options Error: No Sub Type Information |
GO to Pinpoint Test QA |
| P061E:00 |
Internal Control Module Brake Signal Performance: No Sub Type Information |
GO to Pinpoint Test QA |
| P061E:00 |
Internal Control Module Brake Signal Performance: No Sub Type Information |
GO to Pinpoint Test QA |
| P062F:00 |
Internal Control Module EEPROM Error: No Sub Type Information |
GO to Pinpoint Test QA |
| P0630:00 |
VIN Not Programmed Or Incompatible - ECM/PCM: No Sub Type Information |
GO to Pinpoint Test QA |
| P064F:00 |
Unauthorized Software/Calibration Detected: No Sub Type Information |
GO to Pinpoint Test QA |
| P06E9:00 |
Engine Starter Performance: No Sub Type Information |
GO to Pinpoint Test E |
| P1001:00 |
KOER Not Able to Complete, KOER Aborted: No Sub Type Information |
GO to Pinpoint Test F |
| P1001:00 |
KOER Not Able To Complete, KOER Aborted: No Sub Type Information |
GO to Pinpoint Test QC |
| P160A:00 |
Control Module Vehicle Options Reconfiguration Error: No Sub Type Information |
GO to Pinpoint Test QA |
| P1635:00 |
Tire/Axle Out Of Acceptable Range: No Sub Type Information |
GO to Pinpoint Test QA |
| P1639:00 |
Vehicle ID Block Corrupted, Not Programmed: No Sub Type Information |
GO to Pinpoint Test QA |
| P1935:00 |
Brake Switch/Sensor Signal: No Sub Type Information |
GO to Pinpoint Test QA |
| P264F:00 |
Engine Serial Number Not Programmed Or Incompatible: No Sub Type Information |
GO to Pinpoint Test QA |
| U0101:00 |
Lost Communication With TCM: No Sub Type Information |
GO to Pinpoint Test QA |
| U0104:00 |
Lost Communication With Cruise Control Module: No Sub Type Information |
GO to Pinpoint Test QA |
| U0121:00 |
Lost Communication With Anti-Lock Brake System (ABS) Control Module "A": No Sub Type Information |
GO to Pinpoint Test A |
| U0121:00 |
Lost Communication With Anti-Lock Brake System (ABS) Control Module A: No Sub Type Information |
GO to Pinpoint Test QA |
| U0126:00 |
Lost Communication With Steering Angle Sensor Module: No Sub Type Information |
GO to Pinpoint Test B |
| U0138:00 |
Lost Communication With All Terrain Control Module: No Sub Type Information |
GO to Pinpoint Test QA |
| U0140:00 |
Lost Communication With Body Control Module: No Sub Type Information |
GO to Pinpoint Test QA |
| U0155:00 |
Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information |
GO to Pinpoint Test QA |
| U0164:00 |
Lost Communication With HVAC Control Module: No Sub Type Information |
GO to Pinpoint Test C |
| U0212:00 |
Lost Communication With Steering Column Control Module: No Sub Type Information |
GO to Pinpoint Test B |
| U0212:00 |
Lost Communication With Steering Column Control Module: No Sub Type Information |
GO to Pinpoint Test QA |
| U0298:00 |
Lost Communication With DC/DC Converter Control Module A: No Sub Type Information |
GO to Pinpoint Test QA |
| U0402:00 |
Invalid Data Received From TCM: No Sub Type Information |
GO to Pinpoint Test QA |
| U0415:00 |
Invalid Data Received From Anti-Lock Brake System (ABS) Control Module A: No Sub Type Information |
GO to Pinpoint Test QA |
| U0422:00 |
Invalid Data Received From Body Control Module: No Sub Type Information |
GO to Pinpoint Test QA |
| U0423:00 |
Invalid Data Received From Instrument Panel Cluster Control Module: No Sub Type Information |
GO to Pinpoint Test QA |
| U1011:00 |
Invalid Internal Control Module Monitoring Data Received From ECM/PCM: No Sub Type Information |
GO to Pinpoint Test QA |
| U1012:00 |
Invalid Internal Control Module Monitoring Data Received From Anti-Lock Brake System (ABS) Control Module: No Sub Type Information |
GO to Pinpoint Test QA |
| U1013:00 |
Invalid Internal Control Module Monitoring Data Received From TCM: No Sub Type Information |
GO to Pinpoint Test QA |
| U2100:00 |
Initial Configuration Not Complete: No Sub Type Information |
GO to Pinpoint Test QA |
| U2101:00 |
Control Module Configuration Incompatible: No Sub Type Information |
GO to Pinpoint Test QA |
| U2200:00 |
Control Module Configuration Memory Corrupt: No Sub Type Information |
GO to Pinpoint Test QA |