Pinpoint Test D: DTC (Diagnostic Trouble Code) B10D7:55
- Normal Operation and Fault Conditions
REFER to: Passive Anti-Theft System (PATS) .
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition BCM B10D7:55 PATS Key: Not Configured Sets when the CEI was not completed during the PMI procedure. Possible Sources
- CEI was not completed during the PMI procedure.
- D1 CHECK BCM (BODY CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)
- Using a diagnostic scan tool, carry out the BCM self-test.
Are there any other Diagnostic Trouble Codes (DTCs) Present?
Yes DIAGNOSE all other Diagnostic Trouble codes (DTCs) first. Refer to Diagnostic Trouble Code (DTC) Chart . No The Configurable Engine Immobilizer (CEI) was not completed during the PMI. Using the diagnostic scan tool, CARRY OUT the Configurable Engine Immobilizer (CEI) as part of the PMI following on-screen instructions.