Pinpoint Test F: DTC (Diagnostic Trouble Code) B10DA:51
- Normal Operation and Fault Conditions
REFER to: Passive Anti-Theft System (PATS) .
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition BCM B10DA:51 PATS Target Identifier: Not Programmed Sets when there is no PCM / SOBDMC (if equipped) ID stored in the BCM memory. Possible Sources
- There is no PCM and the SOBDMC (if equipped) ID stored in the BCM memory
- F1 CHECK BCM (BODY CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)
- Using a diagnostic scan tool, carry out the BCM self-test.
Are there any other Diagnostic Trouble Codes (DTCs) Present?
Yes DIAGNOSE all other Diagnostic Trouble codes (DTCs) first. Refer to Diagnostic Trouble Code (DTC) Chart No CARRY OUT a parameter reset. REFER to: Passive Anti-Theft System (PATS) .