Pinpoint Test A: The CCM (Cruise Control Module) Does Not Communicate With The Diagnostic Scan Tool
WARNING: This page is about a different car, the 2023 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to Cruise Control
for schematic and connector information.
Normal Operation and Fault Conditions
The CCM communicates with the diagnostic scan tool through the IPMA on a private CAN circuit. REFER to: Cruise Control - System Operation and Component Description .
Possible Sources
- Wiring, terminals and connector
- CCM
- IPMA
- A1 CHECK FOR IPMA (IMAGE PROCESSING MODULE A) DIAGNOSTIC TROUBLE CODES (DTCS)
- Connect the diagnostic tool.
- Ignition ON.
- Using a diagnostic scan tool, clear all IPMA DTCs.
- Wait at least 10 seconds.
- Using a diagnostic scan tool, perform the IPMA self-test.
Are any network or non-network DTCs recorded?
Yes DIAGNOSE and REPAIR those DTCs first. REFER to: Lane Keeping System . No REFER to CCM DTC U2008:08, GO to Pinpoint Test H