LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2023 >> Edge Titanium >> Repair and Diagnosis >> External Pages >> Different car >> Section 370 (Steering Column) >> Diagnosis And Testing >> Steering Column >> Pinpoint Tests >> Pinpoint Test C : The Adjustable Steering Column Operates In One Second Intervals When Using The Steering Column Control Switch (Jog Mode) >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test C : The Adjustable Steering Column Operates In One Second Intervals When Using The Steering Column Control Switch (Jog Mode): Notes

WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Adjustable Steering Column for schematic and connector information.

Normal Operation and Fault Conditions 

REFER to: Steering Column - System Operation and Component Description .

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
B12A7:11 Steering Column Tilt Sensor A: Circuit Short To Ground This DTC sets in continuous memory and on-demand if the DSM detects a short to battery voltage on the telescopic sensor feedback circuit.
B12A7:12 Steering Column Tilt Sensor A: Circuit Short To Battery This DTC sets in continuous memory and on-demand if the DSM detects a short to ground on the telescopic sensor feedback circuit.
B12A8:11 Steering Column Telescope Sensor A: Circuit Short To Ground This DTC sets in continuous memory and on-demand if the DSM detects a short to battery voltage on the tilt sensor feedback circuit.
B12A8:12 Steering Column Telescope Sensor A: Circuit Short To Battery This DTC sets in continuous memory and on-demand if the DSM detects a short to ground on the tilt sensor feedback circuit.
B1375:31 Steering Column Tilt Motor: No Signal This DTC sets when the DSM senses the tilt motor circuit current draw is above a specified threshold when the driver is active.
B137E:31 Steering Column Telescope Motor: No Signal This DTC sets when the DSM senses the telescope motor circuit current draw is above a specified threshold when the driver is active.

Possible Sources