Powertrain/Drivetrain Mount Neutralizing

WARNING: This page is about a different car, the 2022 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

For information on Ford Color Coded Illustrations refer to OEM Color Coding .

Adjustment

NOTE: Refer to the appropriate article and procedure for special instructions on loosening and tightening mount fasteners.

With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking And Lifting .
Loosen, but do not remove, the powertrain/drivetrain mount fasteners.
Lower the vehicle.
NOTE: Do not twist or strain the powertrain/drivetrain mounts or damage to the mounts may occur.

Start the vehicle and move it in forward 0.6 m (1.97 ft) - 1.2 m (3.94 ft). Then move the vehicle in reverse the same distance.
Raise and support the vehicle.
Tighten the powertrain/drivetrain mount fasteners.
Lower the vehicle.
Test the system for normal operation.