LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2023 >> Escape ST-Line Select >> Repair and Diagnosis >> External Pages >> Different car >> Section 1328 (MULTIFUNCTION Electronic Modules) >> Removal And Installation >> Radio Transceiver Module (RTM) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Radio Transceiver Module (RTM): Installation

WARNING: This page is about a different car, the 2022 Ford Bronco Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Obtain the specified adhesive commercially. Depending on the headliner and optional wire harness(es), the purchase of multiple tubes is suggested.

    1. Position the RTM onto the new headliner, making sure the harness has enough length to connect to the RTM.
    2. Apply the adhesive in the same location as the factory installed adhesive on the RTM to avoid any NVH concern(s).

      Material: 3M™ Super-Fast Repair Adhesive / 04747

  2. To install, reverse the removal procedure.
  3. Using the previous diagnostic scan tool session, carry out the PMI procedure for the RTM. Refer to: Module Configuration - System Operation and Component Description .
scientia non olet · About LEMON Manuals