LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2023 >> Escape ST-Line Select >> Repair and Diagnosis >> External Pages >> Different car >> Section 1412 (All-Wheel Drive (AWD) Systems) >> Removal And Installation >> All-Wheel Drive (AWD) Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

All-Wheel Drive (AWD) Module: Installation

WARNING: This page is about a different car, the 2023 Ford Bronco Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
    NOTE: Carry out the remaining steps only if installing a new AWD module.
  2. Using the diagnostic scan tool, carry out the AWD - Active Torque Coupling Configuration routine. The RDU 16-digit alpha numeric bar code is located on the label attached to the RDU.
    GFD746329Courtesy of FORD MOTOR COMPANY
  3. Using a diagnostic scan tool, complete the PMI process for the AWD module following the on-screen instructions.
scientia non olet · About LEMON Manuals