Component Description: PDM
WARNING: This page is about a different car, the 2023 Ford Bronco Sport. However, it is still accessible from the selected car via links, so may be relevant.
For the power window function, the PDM receives power window commands from the passenger door window control switch or from the DDM through the MS-CAN.
For the power mirror functions, the PDM operates as follows:
- RH exterior mirror glass position by supplying voltage and ground to the exterior mirror motors based on messages from the DDM.
- When the heated mirror function is selected, it supplies voltage and ground to the RH exterior mirror glass heating element based on messages received from the FCIM.
- When the memory mirror function is selected, it supplies the voltage and ground to the RH mirror motor and monitors the potentiometers to determine the mirror glass position. Memory mirror positions are stored in the PDM memory.
For additional information:
- Refer to: Handles, Locks, Latches and Entry Systems - System Operation and Component Description .
- Refer to: Glass, Frames and Mechanisms - Vehicles With: One-Touch Open and Close Front Windows - System Operation and Component Description .
- Refer to: Glass, Frames and Mechanisms - Vehicles With: One-Touch Open Driver Window - System Operation and Component Description .
- Refer to: Rear View Mirrors - System Operation and Component Description .
The PDM requires PMI when replaced.
For additional information, Refer to: Module Programming .