LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2023 >> Escape ST-Line Select >> Repair and Diagnosis >> External Pages >> Different car >> Section 169 (Tire Pressure Monitoring System (TPMS)) >> Description And Operation >> Tire Pressure Monitoring System (TPMS) - System Operation and Component Description >> Network Message Charts
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Network Message Charts

WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

RTM TPMS Network Input Messages 

Broadcast Message Originating Module Message Purpose
TPMS status BCM This message is sent to the GWM and then to the RTM. Communicates tire pressure system status to the RTM; system fault, sensor fault, low pressure, system active, training active, training complete and tires not trained.
TPMS sensor status BCM This message is sent to the GWM and then to the RTM. Communicates the status or each tire pressure sensor individually to the RTM; unknown, normal, low or fault.
TPMS warning indicator BCM This message is sent to the GWM and then to the RTM. This message informs the RTM of the TPMS warning indicator status; on, off, or flashing.

GFM Network Input Messages 

Broadcast Message Originating Module Message Purpose
Ambient air temperature PCM This message is sent to the GWM and then to the GFM. The GFM uses the information in this message for determining TPMS sensor faults and for system operation.
Trailer learn mode IPC This message is sent to the GWM and then to the GFM. This message lets the GFM the operator or diagnostic scan tool has requested activation of the TPMS learn mode.
Trailer tire count IPC This message is sent to the GWM and then to the GFM. This message contains the number of road wheels on the trailer as set by the operator. The minimum number of allowable road wheels is 2 and the maximum number is 6. This information is used for determining TPMS sensor faults and for system operation.
Trailer tire pressure threshold IPC This message is sent to the GWM and then to the GFM. This message contains the pressure threshold of the trailer tires as set by the operator. This information is used for determining TPMS sensor faults and for system operation.
Vehicle speed PCM This message is sent to the GWM and then to the GFM. The GFM uses the information in this message for determining TPMS sensor faults and for system operation.
scientia non olet · About LEMON Manuals