LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2023 >> Escape ST-Line Select >> Repair and Diagnosis >> External Pages >> Different car >> Section 739 (Electronic Power Assist Steering Guided Routine Testing) >> Pinpoint Tests >> Pinpoint Tests CE: PSCM DTC U2101 Control Module Configuration Incompatible >> Normal Operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Normal Operation

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2022 Lincoln Navigator, 2022 Lincoln Nautilus, 2022 Lincoln Corsair, 2022 Lincoln Aviator, and 2022 Ford Transit-350 HD. However, it is still accessible from the selected car via links, so may be relevant.

The PSCM receives vehicle configuration information from the IPC and stores the information for later use. When the ignition is set to ON, the PSCM compares the ECU configuration stored in memory to the configuration message sent from the IPC. If the stored data does not match the received data, a DTC is set. This is most likely due to a new module not being programmed correctly or the programming was interrupted.

  1. CE1: CHECK THE IPC CONFIGURATION 
    • Review the vehicle repair history for recent service actions related to the IPC.
    • Have there been any recent service actions with the IPC?
    Yes No
    REPEAT the PMI procedure as directed by the diagnostic scan tool. REFER to the Instrumentation, Message Center and Warning Chimes article and DIAGNOSE any IPC concerns.