All-Wheel Drive (AWD) Module: Installation
WARNING: This page is about a different car, the 2022 Lincoln Nautilus. However, it is still accessible from the selected car via links, so may be relevant.
- To install, reverse the removal procedure.NOTE: Carry out the remaining steps only if installing a new AWD module.
-
NOTE: The 16/17 -digit alpha numeric bar code is located on the label attached to the Rear Drive Unit (RDU).
Using the scan tool, configure RDU bar code to AWD module through the OBD port.
- Using a diagnostic scan tool, complete the PMI process for the AWD module following the on-screen instructions.