Sliding Glass Panel Operation

WARNING: This page is about a different car, the 2022 Lincoln Nautilus. However, it is still accessible from the selected car via links, so may be relevant.

When the front sliding glass panel OPEN switch is pressed and released the front sliding glass panel will automatically open and stop at a predetermined position before the fully open position (comfort position). Pressing and releasing the front sliding glass panel OPEN switch a second time (after the initial stop) will open the front sliding glass panel to the full open position. To fully close the front sliding glass panel, press and release the front sliding glass panel CLOSE switch. The front sliding glass panel will fully close. The front sliding glass panel movement can be stopped at any time in either direction by pressing the front sliding glass panel switch in either direction. The vent position can only be requested when the front sliding glass panel is in the fully closed position. To open to the vent position, press and release the vent switch. The front sliding glass panel will move to the vent position automatically. The front sliding glass panel can be fully closed from the vent position by pressing the front sliding glass panel CLOSE switch. If the shield is in the closed position and the front sliding glass panel OPEN switch is pressed, the shield will perform a one-touch open operation automatically which will then be followed by the front sliding glass panel operation that was requested. To partially open or close the front sliding glass panel from any position, press and hold the front sliding glass panel OPEN or CLOSE switch and release at the desired position.