Diagnostic Trouble Code (DTC) Chart
WARNING: This page is about a different car, the 2022 Ford Police Interceptor Utility and 2022 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
Diagnostic Trouble Code Chart
| Module | DTC | Description | Action |
|---|---|---|---|
| BCM | B1175:01 | Driver Door Ajar Switch: General Electrical Failure | If the courtesy lamps are always on, GO to Pinpoint Test C |
| BCM | B1175:01 | Driver Door Ajar Switch: General Electrical Failure | If the courtesy lamps are inoperative, GO to Pinpoint Test A |
| BCM | B1176:01 | Passenger Door Ajar Switch: General Electrical Failure | If the courtesy lamps are always on, GO to Pinpoint Test C |
| BCM | B1176:01 | Passenger Door Ajar Switch: General Electrical Failure | If the courtesy lamps are inoperative, GO to Pinpoint Test A |
| BCM | B11C0:01 | Driver Side Rear Door Ajar Switch: General Electrical Failure | If the courtesy lamps are always on, GO to Pinpoint Test C |
| BCM | B11C0:01 | Driver Side Rear Door Ajar Switch: General Electrical Failure | If the courtesy lamps are inoperative, GO to Pinpoint Test A |
| BCM | B11C1:01 | Passenger Side Rear Door Ajar Switch: General Electrical Failure | If the courtesy lamps are always on, GO to Pinpoint Test C |
| BCM | B11C1:01 | Passenger Side Rear Door Ajar Switch: General Electrical Failure | If the courtesy lamps are inoperative, GO to Pinpoint Test A |
| BCM | B12C2:11 | Puddle Lamp: Circuit Short To Ground | GO to Pinpoint Test B |
| BCM | B12C2:15 | Puddle Lamp: Circuit Short To Battery or Open | If the illuminated scuff plates are always on, GO to Pinpoint Test D |
| BCM | B12C2:15 | Puddle Lamp: Circuit Short To Battery or Open | If one or both illuminated scuff plates are inoperative, GO to Pinpoint Test B |
| BCM | B1306:01 | Liftgate Ajar Switch: General Electrical Failure | If the courtesy lamps are always on, GO to Pinpoint Test C |
| BCM | B1306:01 | Liftgate Ajar Switch: General Electrical Failure | If the courtesy lamps are inoperative, GO to Pinpoint Test J |
| BCM | B1313:11 | Interior Lighting Output: Circuit Short To Ground | GO to Pinpoint Test B |
| BCM | B1313:15 | Interior Lighting Output: Circuit Short To Battery or Open | If the courtesy lamps are always on, GO to Pinpoint Test D |
| BCM | B1313:15 | Interior Lighting Output: Circuit Short To Battery or Open | If the courtesy lamps are inoperative, GO to Pinpoint Test B |
| BCM | B145C:11 | Ambient Lighting Power Supply Output: Circuit Short To Ground | GO to Pinpoint Test H |
| BCM | B145C:15 | Ambient Lighting Power Supply Output: Circuit Short To Battery or Open | GO to Pinpoint Test H |
| BCM | B1465:00 | Ambient Lighting Bus 1: No Sub Type Information | If all the ambient lighting is inoperative, always on or does not change color/intensity, GO to Pinpoint Test H |
| BCM | B1465:00 | Ambient Lighting Bus 1: No Sub Type Information | If one or more of the ambient lighting Light Emitting Diodes (LEDs) are inoperative or do not change color/intensity, GO to Pinpoint Test I |
| BCM | B1465:96 | Ambient Lighting Bus 1: Component Internal Failure | If all the ambient lighting is inoperative, always on or does not change color/intensity, GO to Pinpoint Test H |
| BCM | B1465:96 | Ambient Lighting Bus 1: Component Internal Failure | If one or more of the ambient lighting Light Emitting Diodes (LEDs) are inoperative or do not change color/intensity, GO to Pinpoint Test I |
| BCM | B1467:00 | Ambient Lighting Bus 3: No Sub Type Information | If all the ambient lighting is inoperative, always on or does not change color/intensity, GO to Pinpoint Test H |
| BCM | B1467:00 | Ambient Lighting Bus 3: No Sub Type Information | If one or more of the ambient lighting Light Emitting Diodes (LEDs) are inoperative or do not change color/intensity, GO to Pinpoint Test I |
| BCM | B1467:96 | Ambient Lighting Bus 3: Component Internal Failure | If all the ambient lighting is inoperative, always on or does not change color/intensity, GO to Pinpoint Test H |
| BCM | B1467:96 | Ambient Lighting Bus 3: Component Internal Failure | If one or more of the ambient lighting Light Emitting Diodes (LEDs) are inoperative or do not change color/intensity, GO to Pinpoint Test I |
| BCM | B14AA:11 | Demand Lamp Output: Circuit Short To Ground | GO to Pinpoint Test E |
| BCM | B14AA:15 | Demand Lamp Output: Circuit Short To Battery or Open | GO to Pinpoint Test E |
| BCM | B153C:11 | Color Ambient Light Output: Circuit Short To Ground | GO to Pinpoint Test H |
| BCM | B153C:15 | Color Ambient Light Output: Circuit Short To Battery or Open | GO to Pinpoint Test H |
| DDM | B1165:11 | Left Front Puddle Lamp Output: Circuit Short To Ground | GO to Pinpoint Test G |
| DDM | B1165:15 | Left Front Puddle Lamp Output: Circuit Short To Battery Or Open | GO to Pinpoint Test G |
| PDM | B1166:11 | Right Front Puddle Lamp Output: Circuit Short To Ground | GO to Pinpoint Test G |
| PDM | B1166:15 | Right Front Puddle Lamp Output: Circuit Short To Battery Or Open | GO to Pinpoint Test G |
| RGTM | B1306:11 | Liftgate Ajar Switch: Circuit Short To Ground | GO to Pinpoint Test J |
| RGTM | B1306:12 | Liftgate Ajar Switch: Circuit Short To Battery | GO to Pinpoint Test C |