Pinpoint Test BO: A IPMA (Image Processing Module A) Does Not Communicate With The Diagnostic Scan Tool
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Normal Operation and Fault Conditions
REFER to: Lane Keeping System - System Operation and Component Description .
Possible Sources
- Fuse
- Wiring, terminals or connectors
- Module
- BO1 CHECK IPMA (IMAGE PROCESSING MODULE A) MODULE CONNECTED WITH SCAN TOOL
- Ignition ON.
- Using a diagnostic scan tool, check IPMA communicates with scan tool.
Is it communicates with scan tool?
Yes The system is operating correctly at this time. No REFER to: Controller Area Network (CAN) Module Communications Network . REFER to: Ethernet Module Communications Network .