| B1265:23 |
Left Rear Turn Lamp Feedback: Signal Stuck Low |
REFER to: Turn Signal and Hazard Lamps
. |
| B1265:24 |
Left Rear Turn Lamp Feedback: Signal Stuck High |
REFER to: Turn Signal and Hazard Lamps
. |
| B1266:23 |
Right Rear Turn Lamp Feedback: Signal Stuck Low |
REFER to: Turn Signal and Hazard Lamps
. |
| B1266:24 |
Right Rear Turn Lamp Feedback: Signal Stuck High |
REFER to: Turn Signal and Hazard Lamps
. |
| B126E:23 |
Right Rear Window Fully Down Feedback: Signal Stuck Low |
REFER to: Convertible Top
. |
| B126E:24 |
Right Rear Window Fully Down Feedback: Signal Stuck High |
REFER to: Convertible Top
. |
| B126F:23 |
Left Rear Window Fully Down Feedback: Signal Stuck Low |
REFER to: Convertible Top
. |
| B126F:24 |
Left Rear Window Fully Down Feedback: Signal Stuck High |
REFER to: Convertible Top
. |
| B1271:11 |
Left Stop/Turn Inner Lamp: Circuit Short To Ground |
REFER to: Stoplamps
. |
| B1271:15 |
Left Stop/Turn Inner Lamp: Circuit Short To Battery or Open |
REFER to: Stoplamps
. |
| B1272:11 |
Right Stop/Turn Inner Lamp: Circuit Short To Ground |
REFER to: Stoplamps
. |
| B1272:15 |
Right Stop/Turn Inner Lamp: Circuit Short To Battery or Open |
REFER to: Stoplamps
. |
| B1273:11 |
Right Stop/Turn Middle Lamp: Circuit Short To Ground |
REFER to: Stoplamps
. |
| B1273:15 |
Right Stop/Turn Middle Lamp: Circuit Short To Battery or Open |
REFER to: Stoplamps
. |
| B1274:11 |
Left Stop/Turn Middle Lamp: Circuit Short To Ground |
REFER to: Stoplamps
. |
| B1274:15 |
Left Stop/Turn Middle Lamp: Circuit Short To Battery or Open |
REFER to: Stoplamps
. |
| B1275:11 |
Left Stop/Turn Outer Lamp: Circuit Short To Ground |
REFER to: Stoplamps
. |
| B1275:15 |
Left Stop/Turn Outer Lamp: Circuit Short To Battery or Open |
REFER to: Stoplamps
. |
| B1276:11 |
Right Stop/Turn Outer Lamp: Circuit Short To Ground |
REFER to: Stoplamps
. |
| B1276:15 |
Right Stop/Turn Outer Lamp: Circuit Short To Battery or Open |
REFER to: Stoplamps
. |
| B127A:12 |
Global Window Control: Circuit Short To Battery |
REFER to: Glass, Frames and Mechanisms
. |
| B127A:14 |
Global Window Control: Circuit Short To Ground or Open |
REFER to: Glass, Frames and Mechanisms
. |
| B127B:11 |
Ambient Lighting Zone 1 Output Red LED: Circuit Short To Ground |
REFER to: Interior Lighting
. |
| B127B:15 |
Ambient Lighting Zone 1 Output Red LED: Circuit Short To Battery or Open |
REFER to: Interior Lighting
. |
| B127D:11 |
Ambient Lighting Zone 3 Output Red LED: Circuit Short To Ground |
REFER to: Interior Lighting
. |
| B127D:15 |
Ambient Lighting Zone 3 Output Red LED: Circuit Short To Battery or Open |
REFER to: Interior Lighting
. |
| B127E:11 |
Ambient Lighting Zone 1 Output Green LED: Circuit Short To Ground |
REFER to: Interior Lighting
. |
| B127E:15 |
Ambient Lighting Zone 1 Output Green LED: Circuit Short To Battery or Open |
REFER to: Interior Lighting
. |
| B1280:11 |
Ambient Lighting Zone 3 Output Green LED: Circuit Short To Ground |
REFER to: Interior Lighting
. |
| B1280:15 |
Ambient Lighting Zone 3 Output Green LED: Circuit Short To Battery or Open |
REFER to: Interior Lighting
. |
| B1281:11 |
Ambient Lighting Zone 1 Output Blue LED: Circuit Short To Ground |
REFER to: Interior Lighting
. |
| B1281:15 |
Ambient Lighting Zone 1 Output Blue LED: Circuit Short To Battery or Open |
REFER to: Interior Lighting
. |
| B1283:11 |
Ambient Lighting Zone 3 Output Blue LED: Circuit Short To Ground |
REFER to: Interior Lighting
. |
| B1283:15 |
Ambient Lighting Zone 3 Output Blue LED: Circuit Short To Battery or Open |
REFER to: Interior Lighting
. |
| P2533:14 |
Ignition Switch Run/Start Position Circuit: Circuit Short To Ground or Open |
REFER to: Steering Wheel and Column Electrical Components
. |
| U0140:87 |
Lost Communication With Body Control Module: Missing Message |
GO to Pinpoint Test A |
| U0155:87 |
Lost Communication With Instrument Panel Cluster (IPC) Control Module: Missing Message |
GO to Pinpoint Test B |
| U0422:68 |
Invalid Data Received From Body Control Module: Event Information |
This DTC is set when the BCMB receives invalid data from the BCM. RETRIEVE and REPAIR all non-network DTCs in the BCM. REFER to: Body Control Module (BCM)
. |
| U1000:00 |
Solid State Driver Protection Active -Driver Disabled: No Sub Type Information |
GO to Pinpoint Test D |
| U2100:00 |
Initial Configuration Not Complete: No Sub Type Information |
CARRY OUT Programmable Module Installation (PMI) on the BCMB. REFER to: Module Configuration - System Operation and Component Description
. |
| U3000:49 |
Control Module: Internal Electronic Failure |
ADDRESS all other DTCs first. CLEAR the DTCs. REPEAT the self-test. If DTC U3000:49 is retrieved again, INSTALL a new BCMB. REFER to: Body Control Module B (BCMB)
. |
| U3003:62 |
Battery Voltage: Signal Compare Failure |
GO to Pinpoint Test C |