Common Specifications & Procedures
MUSTANG MACH-E COMMON SPECIFICATIONS & PROCEDURES (ELECTRIC)
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | SPECIFICATIONS | ||
| Torque | Refer to appropriate component in REMOVAL AND INSTALLATION . | ||
| Axle Nut/Hub Nut | |||
| Stage 1: 81 lb.ft (110 Nm) Stage 2: 148 lb.ft (200 Nm) |
|||
| Battery | SPECIFICATIONS | ||
| Brakes | |||
| Bleeding Sequence | BRAKE SYSTEM PRESSURE BLEEDING | ||
| Torque | |||
| Front Disc Brake | Refer to appropriate component in BRAKE DISC . | ||
| Rear Disc Brakes | Refer to appropriate component in BRAKE DISC . | ||
| Charging | |||
| High Voltage Battery Charging System | HIGH VOLTAGE BATTERY CHARGING SYSTEM | ||
| Electric Powertrain Cooling System | |||
| General Service Specifications | SPECIFICATIONS (High Voltage Battery) and SPECIFICATIONS (Motor Electronics) | ||
| Radiator | RADIATOR | ||
| Electric Motor Water Pump | COOLANT PUMP . | ||
| Engine Mechanical | SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Wheel Alignment | |||
| Adjustment Specifications | GENERAL SPECIFICATIONS | ||
| Torque | Refer to appropriate procedure in GENERAL PROCEDURES . | ||
| Wheel & Tire | |||
| Lug Nut Torque | For tightening sequence, refer to WHEEL AND TIRE
. 150 lb.ft (204 Nm) |
||