LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2024 >> Bronco Big Bend, 2D Utility, Automatic T/Case Control, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 268 (Climate Control System - General Information (Diagnosis & Testing - Assembly)) >> Diagnosis And Testing >> Climate Control System - Vehicles With: Electronic Manual Temperature Control (EMTC) >> Pinpoint Tests >> Pinpoint Test Ad: U3000:41, U3000:49
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test Ad: U3000:41, U3000:49

WARNING: This page is about a different car, the 2023 Ford Bronco. However, it is still accessible from the selected car via links, so may be relevant.
  1. DTC Fault Trigger Conditions 
    DTC Description Fault Trigger Condition
    HVAC U3000:41 Control Module: General Checksum Failure Sets when the HVAC control module detects an internal fault.
    HVAC U3000:49 Control Module: Internal Electronic Failure Sets when the HVAC control module detects an internal fault.

    Possible Sources 

    • Suspect module

  2. AD1 INSTALL A NEW SUSPECT MODULE

    • Ignition OFF.

    • Operate the system and determine if the concern is still present.

    Is the concern still present? 

    Yes  CHECK OASIS and follow the instructions for the applicable TSB, GSB, SSM or FSA.
    No  The repair is complete.