Network Message Chart
BCM Network Input Messages
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| PATS start request target data | PCM | The PCM sends the BCM and the ABS module a challenge request for a valid ID. |
| RKE data | RTM | The RTM sends the BCM programmed passive key information. |
IPC Network Input Messages
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Vehicle mode | BCM | Used by the IPC to display "No Key Detected" when the START/STOP button is pressed and no programmed key is detected within the vehicle. |
PCM Network Input Messages
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| PATS control command | BCM | The response from the BCM supplying the PCM target 1 challenge ID. If the BCM ID response is incorrect, then PATS prevents the vehicle from starting. |
| PATS sub-target command | PCM | The response from the ABS module supplying the PCM challenge ID. If the ABS module ID response is incorrect, then PATS prevents the vehicle from starting. |
ABS Module Network Input Messages
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Immobilizer target 1 function | PCM | The immobilizer sub-target function sends a response message to the target 1 challenge message from the PCM. |