Pinpoint Test D: DTC (Diagnostic Trouble Code) B10D7:55
WARNING: This page is about a different car, the 2023 Ford Bronco. However, it is still accessible from the selected car via links, so may be relevant.
- Normal Operation and Fault Conditions
REFER to: Passive Anti-Theft System (PATS) - System Operation and Component Description .
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition BCM B10D7:55 PATS Key: Not Configured Sets when the CEI was not completed during the PMI procedure. Possible Sources
- CEI was not completed during the PMI procedure.
- D1 CHECK BCM (BODY CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)
- Using a diagnostic scan tool, carry out the BCM self-test.
Are there any other Diagnostic Trouble Codes (DTCs) Present?
Yes DIAGNOSE all other Diagnostic Trouble Codes (DTCs) first. Refer to Diagnostic Trouble Code (DTC) Chart No The Configurable Engine Immobilizer (CEI) was not completed during the PMI. CARRY OUT the Configurable Engine Immobilizer (CEI) as part of the PMI.