Pinpoint Test AP: DTC (Diagnostic Trouble Code) U3000:42
WARNING: This page is about a different car, the 2023 Ford Bronco. However, it is still accessible from the selected car via links, so may be relevant.
- Normal Operation and Fault Conditions
REFER to: Lane Keeping System - System Operation and Component Description .
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition IPMA U3000:42 Control Module: General Memory Failure This DTC sets in the IPMA when other IPMA related DTC 's not addressed. Possible Sources
- IPMA concern
- AP1 CHECK WHETHER ALL IPMA (IMAGE PROCESSING MODULE A) DTC (DIAGNOSTIC TROUBLE CODE) 'S ADDRESSED
- Ignition ON.
- Using a diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs) for the module in question.
Is DTC U3000:42 still present?
Yes ADDRESS all other IPMADTC first. If this continuous memory DTC is still present after all other DTC have been addressed, INSTALL a new IPMA. REFER to: Image Processing Module A (IPMA) . No The repair is complete.