Pinpoint Test Aa: DTC (Diagnostic Trouble Code) U0419:86
WARNING: This page is about a different car, the 2023 Ford Bronco. However, it is still accessible from the selected car via links, so may be relevant.
- Normal Operation and Fault Conditions
REFER to: Lane Keeping System - System Operation and Component Description .
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition IPMA U0419:86 Invalid Data Received From Steering Effort Control Module: Signal Invalid This DTC sets in the IPMA when the CCM receives invalid network data from the SCCM with a faulted cruise control switch input. Possible Sources
- SCCM concern
- AA1 CHECK FOR STEERING COLUMN CONTROL MODULE SIGNAL
- Ignition ON.
- Using a diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs) for the module in question.
Is DTC U0419:86 still present?
Yes RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network. No The repair is complete.