Pinpoint Test Ar: DTC (Diagnostic Trouble Code) U3000:64
WARNING: This page is about a different car, the 2023 Ford Bronco. However, it is still accessible from the selected car via links, so may be relevant.
- Normal Operation and Fault Conditions
REFER to: Lane Keeping System - System Operation and Component Description .
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition IPMA U3000:64 Control Module: Signal Plausibility Failure This DTC sets in the IPMA when the IPMA detects the IPMA is not configured correctly. Possible Sources
- IPMA concern
- AR1 CHECK FOR THE CORRECT IPMA (IMAGE PROCESSING MODULE A) CONFIGURATION
- Ignition ON.
- Using a diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs) for the module in question.
Is DTC U3000:64 still present?
Yes CARRY OUT the PMI procedure (when the original module is not available) for the module in question as directed by the diagnostic scan tool. REFER to: Module Programming . No The repair is complete.