Suspension System - General Information: Specifications
General Specifications
NOTE:
Measurements listed at curb load. Curb load is defined as "full service fluids, full fuel tank(s), no passengers and no cargo".
| Item | Specification |
|---|---|
| Ball Joint Deflection | |
| Lower | 0.0 mm (0.0 in) - 0.2 mm (0.0079 in) |
| Ride Height | |
| Front | |
| FWD | 62.0 mm (2.44 in) +/- 11.8 mm (0.47 in) |
| AWD | 56.5 mm (2.22 in) +/- 11.8 mm (0.47 in) |
| ST - AWD and FWD | 56.8 mm (2.24 in) +/- 11.8 mm (0.47 in) |
| Rear | |
| FWD | 27.6 mm (1.09 in) +/- 14.0 mm (0.55 in) |
| AWD | 34.3 mm (1.35 in) +/- 14.0 mm (0.55 in) |
| ST - AWD and FWD | 34.3 mm (1.35 in) +/- 14.0 mm (0.55 in) |
Alignment Specifications
NOTE:
Measurements listed at curb load. Curb load is defined as "full service fluids, full fuel tank(s), no passengers and no cargo".
| Item | LH | RH | Total / Split |
|---|---|---|---|
| Front | |||
| Camber | -0.81deg. +/- 0.75deg. | -0.81deg. +/- 0.75deg. | 0.0deg. +/- 0.75deg. |
| Caster | 3.10deg. +/- 0.75deg. | 3.10deg. +/- 0.75deg. | 0.0deg. +/- 0.75deg. |
| Toe @ curb ride height (positive value is toe in, negative value is toe out) | -- | -- | 0.20deg. +/- 0.20deg. |
| Rear | |||
| Camber (except vehicles with 21 inch wheels) | -1.20deg. +/- 0.75deg. | -1.20deg. +/- 0.75deg. | 0.0deg. |
| Camber (vehicles with 21 inch wheels) | -1.00deg. +/- 0.75deg. | -1.00deg. +/- 0.75deg. | 0.0deg. |
| Toe @ curb ride height (positive value is toe in, negative value is toe out) | 0.13deg. +/- 0.20deg. | 0.13deg. +/- 0.20deg. | 0.26deg. +/- 0.20deg. |
| Thrust angle | -- | -- | -- |