Diagnostic Trouble Code (DTC) Chart
Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
| Module | DTC | Description | Action |
|---|---|---|---|
| PCM | P0219:00 | Engine Overspeed Condition: No Sub Type Information | GO to Pinpoint Test Z |
| PCM | P0297:00 | Vehicle Overspeed Condition: No Sub Type Information | GO to Pinpoint Test Z |
| PCM | P0603 | Internal Control Module Keep Alive Memory (KAM) Error | GO to Pinpoint Test QB |
| PCM | P0685:00 | ECM/PCM Power Relay Control Circuit/Open: No Sub Type Information | GO to Pinpoint Test B |
| PCM | P068A:00 | ECM/PCM Power Relay De-Energized - Too Early: No Sub Type Information | GO to Pinpoint Test B |
| PCM | P06A6:00 | Sensor Reference Voltage 'A' Circuit Range/Performance: No Sub Type Information | GO to Pinpoint Test C |
| PCM | P06A7:00 | Sensor Reference Voltage 'B' Circuit Range/Performance: No Sub Type Information | GO to Pinpoint Test C |
| PCM | P06A8:00 | Sensor Reference Voltage 'C' Circuit Range/Performance: No Sub Type Information | GO to Pinpoint Test C |
| PCM | P06B8:00 | Internal Control Module Non-Volatile Random Access Memory (NVRAM) Error: No Sub Type Information | GO to Pinpoint Test B |
| PCM | P1633 | Keep Alive Power Voltage Too Low | GO to Pinpoint Test QB |
| PCM | P2610 | ECM/PCM Engine Off Timer Performance | GO to Pinpoint Test QB |
| PCM | P2610:00 | ECM/PCM Engine Off Timer Performance: No Sub Type Information | GO to Pinpoint Test QB |