Network Message Chart
Module Network Input Messages APIM
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| WACM send signals | WACM | This message contains the status of WACM charging input to be used for center display |
Module Network Input Messages WACM
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| ACU_Response_Signals | ACM | This message is used by the WACM to determine if the AM/FM radio is in use to perform AM avoidance when tuned band is AM |
| ACU_Send_Signals_13 | ACM | This message is used to determine if AM is the tuned Band and if a seek/scan is taking place to perform AM avoidance |
| ACU_Send_Signals | ACM | This message is used by the WACM to determine if the tuned AM frequency requires AM avoidance |
| BCM_Lamp_Stat_HS3 | GWM | This message is used as a redundant signal from the BCM to disable the charging feature during an interior passive key query |
| BodyInfo_3_HS3 | GWM | This message is used to determine the ignition status to enable/disable the charging feature. |
| VehicleOperatingModes_HS3 | GWM | This message is used to determine the engine crank status for starting / stopping continuous DTC logging |
| HMI_Send_Signals_7 | APIM | This message is used to determine the infotainment system status to enable / disable the charging feature |