IPMA Camera Alignment
IPMA camera alignment is required for the lane keeping alert and lane keeping aid to function correctly. The procedure is initiated using the diagnostic scan tool and requires about 10 minutes of driving above 64 km/h (40 mph) on a flat, straight road with highly visible lane markings to complete.
NOTE:
Avoid lane crossing, excessive steering angle changes or sudden change in vehicle speed during the IPMA camera alignment process.
NOTE:
The alignment completion is indicated on the diagnostic scan tool. If the alignment is unsuccessful, check the IPMA camera for proper installation.
NOTE:
The IPMA CAMERA MALFUNCTION - SERVICE REQUIRED message in the IPC disappears when the system is aligned.
The IPMA camera alignment procedure should be performed when any of the following occur:
- Windshield replacement
- Change in tire size
- Suspension repair or alignment
- Front air bag deployment