Key Programming Using Two Programmed Keys

For information on Ford Color Coded Illustrations refer to OEM COLOR CODING

1. NOTE: This procedure works only if 2 or more programmed keys are available.

   For additional information, refer to: appropriate Service Information .

2. NOTE: This procedure only works if the customer spare key programming is enabled.

   For additional information, refer to: appropriate Service Information .

3. Insert the first programmed passive anti-theft system (PATS) key into the ignition and turn the key from the OFF position to the ON position (maintain the key in the ON position for approximately 3 seconds).
4. Turn the first key to the OFF position and remove the key from the ignition.
5. Within 10 seconds of turning the key to the OFF position, insert a second programmed passive anti-theft system (PATS) key into the ignition and turn the key from the OFF position to the ON position (maintain the key in the ON position for approximately 3 seconds).
6. Turn the second key to the OFF position and remove the key from the ignition.
7. Within 10 seconds of turning the second key to the OFF position, insert the new, unprogrammed passive anti-theft system (PATS) key into the ignition and turn the key from the OFF position to the ON position (maintain the key in the ON position for approximately 6 seconds).
8. Turn the new key to the OFF position and remove the key from the ignition.
9. If it is desired to program additional keys, repeat steps 3 - 9 for each additional key.