Diagnostic Trouble Code (DTC) Chart
Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
| Module | DTC | Description | Action |
|---|---|---|---|
| ATCM | B1402:67 | Torque Manager (ECM/PCM) All Terrain System State: Signal Incorrect After Event | GO to Pinpoint Test F |
| ATCM | U0102:00 | Lost Communication with Transfer Case Control Module: No Sub Type Information | GO to Pinpoint Test A |
| ATCM | U0121:00 | Lost Communication With Anti-Lock Brake System (ABS) Control Module 'A': No Sub Type Information | GO to Pinpoint Test A |
| ATCM | U0131:00 | Lost Communication With Power Steering Control Module 'A': No Sub Type Information | GO to Pinpoint Test A |
| ATCM | U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to Pinpoint Test A |
| ATCM | U2002:9E | Switch: Stuck On | GO to Pinpoint Test B |
| ATCM | U2009:9E | Rotary Encoder: Stuck On | GO to Pinpoint Test C |
| ATCM | U2100:00 | Initial Configuration Not Complete: No Sub Type Information | GO to Pinpoint Test E |
| ATCM | U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | GO to Pinpoint Test E |
| ATCM | U3000:04 | Control Module: System Internal Failure | GO to Pinpoint Test C |
| ATCM | U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to Pinpoint Test D |
| ATCM | U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to Pinpoint Test D |