Battery Cable: Service and Repair

REMOVAL
1. Turn the ignition switch to the Off position. Be certain that all electrical accessories are turned off.
2. Disconned and isolate the remote battery negative cable terminal.
3. One at a time, trace and disconnect the battery cable retaining pushpins, fasteners and routing dips until the cables are free from the vehicle.
4. Feed the battery cable assembly out of the vehicle.

INSTALLATION
1. Position the battery cable in the vehicle.
2. One at a time, install the battery cable retaining pushpins, fasteners and routing dips until the cable is installed exactly in the factory installed location in the vehicle.
3. Connect the battery negative cable terminal.