Scope of Work For Maintenance Service

Scope Of Work For Maintenance Service

Oil Service

- Engine - Oil change and filter replacement
- Fuel filter with water separator: fuel filter replaced.

Check fluid levels of the following system, refill as necessary.

- Brake reservoir
- Power steering
- Additional battery, if equipped
- Windshields washer fluid
- Engine cooling system (check corrosion inhibitor/antifreeze)

Lubrication work.

- Trailer tow hitch (original equipment)

Inspection

- Check front and rear brake pads for lining thickness
- Check tires for damage and general condition, including spare tire.
- Check tire inflation pressures, including spare tire and correct if necessary
- Parking brake readjusted.
- Inspect chassis and body U-bolt for proper torque. (Only necessary at 1st maintenance service).

Maintenance.

- ASSYST maintenance computer reset

Function check.

- Signalling system, warning and indicator lamps
- Headlamps, exterior lighting
- Windscreen wipers, windscreen washer system

Check for leaks and damage.

- Check for abrasion points and ensure that lines are correctly routed!
- All assemblies: Engine, transmission, transfer case, front axle, rear axle, steering, power steering pump
- All lines and hoses, sensor cables

- Rubber boots on front axle drive shafts, rubber boots on front axle suspension ball joints, shock absorbers

Engine

- Fuel filter renewal
- Air cleaner with maintenance indicator: Check degree of contamination. Air cleaner filter element renewed as necessary.

Chassis and body

- Trailer coupling: Check operation, play and retaining fixtures
- Secondary rubber springs: Visual check
- Tire pressure: Correct as necessary, including spare tire
- Check thickness of brake pads
- Brake test
- Check condition of brake disks. Brake disks renewal as necessary - as a separate order
- Check condition of steering mechanism
- Heating/ventilation dust filter renewal