LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Freightliner >> 2007 >> Sprinter 3500 V6-3.0L DSL Turbo >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Engine Control Module >> Service and Repair >> Removal and Replacement >> Module-Powertrain Control >> Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation






INSTALLATION

NOTE: If a replacement (new) PCM is being installed, the scan tool must be used to program (flash) the new PCM with vehicle specific information.

1. Position the PCM into the guide of the retaining bracket.
2. Carefully push the PCM in to the bracket.
3. Connect the PCM wiring harness connectors.
4. Connect negative battery cable.
5. Using the scan tool, perform the "Engine ECU Replaced (Drive Authorization)", "Check/Write VIN", "Throttle Valve Initialization", and "Fuel Pump Activation" procedures.
scientia non olet · About LEMON Manuals