LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 1993 >> Forward Control 4.3 Z, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 151 (Air Bag Restraint System) >> Removal & Installation >> Driver-Side Inflator Module >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Driver-Side Inflator Module: Installation

WARNING: This page is about a different car, the 1993 GMC Safari and 1993 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install horn contact, steering wheel inflator module connector and CPA clip. Install inflator module to steering wheel.
  2. On Corvette, tighten screws to 87 INCH lbs. (9.7 N.m); on all other models, tighten screws to 27 INCH lbs. (3.1 N.m). To complete installation, reverse removal procedure. Ensure system is functioning properly. See TESTING - SYSTEM OPERATION CHECK  .
scientia non olet · About LEMON Manuals